Bedienungsanleitung Onkyo RDC-7.1 (Seite 13 von 156) (Englisch)

601422

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Index Parts and Facilities

—Continued

Off [71]

When not using either Rec/Zone 3 or Zone 2, press

that button and then press the [Off] button to turn

off the signal.

If the Rec/Zone 3 or Zone 2 signal is turned on and

the connected component is not turned on, the

electric signal will still be sent through the circuitry

and the excess load may cause deterioration of the

audio signal.

Display button [56]

Press to display information about the current input

source signal. Each time you press the [Display]

button, the screen changes to show you different

information concerning the input signal.

DSP [61]

Press these buttons to scroll through the listening

modes and set a new one for the input source you

are currently listening to. For each different input

signal, different listening modes are possible. See

page 58 for a detailed explanation of the different

listening modes.

Dimmer button (Other than European

models) [54]

Press to set the brightness of the front display. There are

four settings available: normal, dark, very dark, and

volume only.

For European models, this function can be operated

only with the remote controller.

RT/PTY/TP button (European models only) [65]

This button is only available on European models.

Press this button to tune into the Radio Data System

(RDS) for FM broadcasting. RDS was developed

within the European Broadcasting Union (EBU)

and is available in most European countries. Each

time the button is pressed, the display changes from

RT (radio text) to PTY (program type) to TP (trafﬁc

program) and then back to RT again.

Tuning button [62]

Use these buttons to change the tuner frequency.

The tuner frequency is displayed in the front display

and it can be changed in 50 kHz increments for FM

and 9 kHz increments for AM. When a station is

tuned into, “> <” will appear in the front display

(When the stereo signal is received,

“

” will appear).

Preset button [63]

When AM or FM is selected as the input source,

press one of these buttons to jump to a radio station

that you preset using the [Memory] button. Pressing

the right button moves from the most recently preset

station to older ones, and pressing the left button

moves in the reverse order.

Tuning Mode button [62, 63]

This button is used to select the Auto or Manual

Tuning Mode.

Memory button [63]

Press to assign the radio station, to which you are

currently tuned, as a preset channel or press to

delete a previously preset station.

Setup /[ ]/[ ]/Enter/[ ]/[ ]/Exit [90]

These buttons are used with the On Screen Display

(OSD) menu.

Setup:

Press to bring up the OSD menu.

Exit:

Press to exit the OSD menu when at the Menu

Screen, or move to one screen previous to the one

that is displayed if at any other screen.

and

: When selecting items in the OSD menu,

press these buttons to move the on-screen cursor (or

the highlighted portion) upward and downward.

and

When setting parameters in the OSD

menu, press these buttons to select parameter values

or modes.

Enter:

Press to display the screen for the selected

item in the OSD menu.

Note for European models:

These buttons are also used to set programs and

ﬁnish scans when performing a PTY or TP scan

with the RDS broadcasts.

Phones jack [54]

This is a standard stereo jack for connecting stereo

headphones.

Getting Started

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo RDC-7.1 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo RDC-7.1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info