Bedienungsanleitung Onkyo SKR-22X (Seite 1 von 8) (Englisch)

492674

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Speaker System

SKS-22X

SKC-22X, SKR-22X

Instruction Manual

Thank you for purchasing an Onkyo

speaker system. Please read this manual

thoroughly before using your new

speakers. Following the instructions in this

manual will enable you to obtain optimum

performance and listening enjoyment from

your speaker system.

Please retain this manual for future

reference.

Contents

Getting Started

Package Contents................................ 2

Getting to Know the Speakers .............2

Installing & Using

Using Rubber Stoppers for more

Stable Platform ................................ 3

Wall Mounting ...................................... 3

Connecting the Speakers .................... 4

Appendix

Operating Precautions ......................... 5

Speaker Care....................................... 5

Use with a TV Set or Computer ...........5

Specifications....................................... 6

■ SKC-22X

■ SKR-22X

* In catalogs and on packaging, the letter at the end

of the product name indicates the color.

Specifications and operations are the same

regardless of color.

Package Contents

Speaker SKC-22X × 1

Speaker SKR-22X

× 2

Speaker cable

4 thick rubber stoppers for SKC-22X

8 thin rubber stoppers for SKR-22X

• The speaker cabinets are sensitive to

extreme temperatures and humidity, do not

put them in locations subject to direct sun-

light or in humid places, such as near an

air conditioner, humidifier, bathroom, or

kitchen.

• Do not put water or other liquids close to

the speakers. If liquid is spilled over the

speakers, the drive units may be damaged.

• As explained in this manual, mount the

speakers on a wall, or on the optional

stands/brackets, otherwise, they may fall,

causing personal injury or damage to the

speakers.

SKR-22X:

8 m (26' 3")

× 2

(Green) (Gray) (Blue)

SKC-22X:

3 m (9' 10-1/8")

Getting to Know the Speakers

Speaker terminals

Keyhole slots

Speaker terminals

We recommend using the supplied rubber

stoppers to achieve the best possible sound

from your speakers. The rubber stoppers pre-

vent the speakers from moving, providing a

more stable platform. Use thick rubber stop-

pers for the SKC-22X, and thin rubber stop-

pers for the SKR-22X

The speakers can easily be wall mounted by

using the keyhole slots.

■ Mounting the SKC-22X

To mount the SKC-22X speaker, use the two

keyhole slots shown to hang the speaker on

two screws that are securely screwed into the

wall.

The distance between the keyhole slots is

183 mm (7-3/16").

■ Mounting the SKR-22X

To mount the SKR-22X speakers, use the key-

hole slot shown to hang each speaker on screw

that is securely screwed into the wall.

Caution:

A mounting screw’s ability to support a speaker

depends on how well it’s anchored to the wall.

If you have hollow walls, screw each mounting

screw into a stud. If there are no studs, or the

walls are solid, use suitable wall anchors.

Use screws with a head diameter of 9 mm

(5/16") or less and a shank diameter of 4 mm

(1/8") or less. With hollow walls, use a cable/

pipe detector to check for any power cables or

water pipes before making any holes.

Leave a gap of between 5 mm (3/16") and

10 mm (7/16") between the wall and the base

of the screw head, as shown.

(We recommend that you consult a home

installation professional.)

Using Rubber Stoppers for

more Stable Platform

Wall Mounting

Thin rubber stoppers

Bottom of the SKR-22X

Thick rubber stoppers

Bottom of

the SKC-22X

12 mm (1/2")

50 mm

(1-15/16")

Wall

Keyhole slot for

wall mounting

5 to 10 mm

(3/16" to 7/16")

183 mm (7-3/16")

Thick rubber

stoppers

Keyhole

slot for wall

mounting

Wall

Thick rubber stoppers

SKR-22X

5 to 10 mm

(3/16" to 7/16")

Read the following before connecting your

speakers:

• Turn off your amp/receiver before making

any connections.

• The nominal impedance of these speakers is

6 Ω. Use only an amp/receiver that supports

this impedance.

• Pay close attention to speaker wiring polar-

ity. Connect positive (+) terminals to only

positive (+) terminals, and negative (–) ter-

minals to only negative (–) terminals. If the

speakers are wired incorrectly, the sound

will be out of phase and will sound unnatu-

ral.

• Be careful not to short

the positive and nega-

tive wires. Doing so

may damage your amp/

receiver.

■ Connecting the Speaker Cables

■ SKC-22X

■ SKR-22X

The left and right speakers are identical, so you

can use either one as the left or right speaker

and the sound quality will not be affected.

Note:

• Connect the speakers to the appropriate

speaker terminals on your amp or receiver.

See your amp or receiver’s instruction man-

ual for details.

Connecting the Speakers

Strip the insulation

from the ends of

the speaker cables,

and twist the bare

wires tightly.

Use the cables to connect each

speaker’s input terminals to the

corresponding speaker output ter-

minals on your amp/receiver.

To make a connection,

while pressing the ter-

minal lever, insert the

wire into the hole, and

then release the lever.

Make sure that the ter-

minals are gripping the bare wires, not

the insulation.

AC INLET

CAUTION :

SPEAKER IMPEDANCE

6 ~ 16

/SPEAKER

Green line

HTX-22HDX

AC INLET

CAUTION :

SPEAKER IMPEDANCE

6 ~ 16

/SPEAKER

HTX-22HDX

Gray line

Surround right speaker Surround left speaker

Blue line

Onkyo SKR-22X Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info