Bedienungsanleitung Onkyo TA-RW255 (Seite 15 von 16) (Englisch)

608265

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Troubleshooting guide

The following guide lists problems which do not require professional servicing. If, however, the problem cannot be remedied using this

guide, contact an Onkyo authorized service center for assistance.

• No power.

Cause:

Power cord plug is loose

Remedy:

Insert plug properly into outlet.

• Playback but no sound.

Cause:

Incorrect connection.

Remedy:

Check and connect correctly according to

page 5.

Cause:

Stereo ampliﬁer input selector switch is set to incor-

rect position.

Remedy:

Change switch position.

•Tape does not move.

Cause:

Slack tape wound around pinch roller.

Remedy:

Take up slack with a pencil (see page 13).

•

button does not engage.

Cause:

No tape in cassette holder.

Remedy:

Insert cassette tape.

Cause:

Erasure prevention tab(s) removed.

Remedy:

Change cassette or cover tab hole with cello-

phane tape.

• Hoarse sound, balance unstable.

Cause:

Playback head dirty.

Remedy:

Clean head (see page 14).

Cause:

Tape is stretched.

Remedy:

Replace cassette.

• Excessive noise and tape hiss.

Cause:

Head has become magnetized.

Remedy:

Demagnetize (see page 14).

Cause:

Tape with high noise level.

Remedy:

Replace cassette.

• Distorted sound.

Cause:

Distortion in tape.

Remedy:

Tape is probably bad but conﬁrm by listening to

another.

• Recordings are distorted.

Cause:

Recording was done at too high a level.

Remedy:

Readjust REC LEVEL knob according to the

directions on page 8.

•Tape squeal and skipping.

Cause:

Dirty heads, pinch rollers or capstan shafts.

Remedy:

Clean (see page 14).

Cause:

Cassette shell is binding tape or tape is stretched.

Remedy:

Change cassette or try correcting with fast for-

ward and rewind.

• Excessive hum during playback.

Cause:

Connecting cables not inserted ﬁrmly.

Remedy:

Insert plugs ﬁrmly.

Cause:

External ﬂux leakage from nearby ampliﬁer or TV

set.

Remedy:

Move deck away from hum source.

• High frequencies too strong.

Cause:

Dolby NR encoded tape played back with NR off.

Remedy:

Select the same noise reduction (Dolby NR B

or C) used when the cassette was recorded.

Cause:

Incorrect equalization.

Remedy:

Conﬁrm that cassette has tape type detection

holes.

• No high frequency sounds.

Cause:

Tape not encoded with Dolby NR played back with

Dolby B or C NR on.

Remedy:

Select the appropriate NR mode using the

DOLBY NR button (OFF).

Cause:

Heads have become dirty.

Remedy:

Clean (see page 14).

• The skip function does not operate properly.

Cause:

The silent sections between songs are too short or

noisy.

Remedy:

Use a cassette with sufﬁciently silent sections

of sufﬁcient length between songs.

• Deck does not operate properly.

Cause:

Tape transport control microcomputer has been

exposed to interference from power supply or static

electricity.

Remedy:

North American model: Unplug the power cord from the

wall outlet, wait approximately 10 seconds and then plug

it again.

Other model: Press the MAIN POWER switch to turn off

the power.

Wait approximately 10 seconds and turn it on again.

In catalogs and on packaging, the letter at the end of the product

name indicates the color. Speciﬁcations and operation are the

same regardless of color.

TA-RW255_En.book Page 15 Tuesday, April 19, 2005 4:36 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TA-RW255 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info