Bedienungsanleitung Onkyo TX-8522 (Seite 7 von 36) (Englisch)

66920

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Getting to Know the Receiver

—Continued

Some button number sections (such as

and

)

contain multiple button descriptions because the name

and function vary according to the model or shipping

destination. Refer to the description corresponding to

your model.

For detailed information, see the pages in parentheses.

STANDBY/ON button (20)

Sets the receiver to On or Standby.

SPEAKERS A and B switches (21)

Turn speaker sets A and B on or off.

PURE AUDIO button and indicator (23)

Selects the Pure Audio listening mode. The

indicator lights up and the display disappears when

this mode is selected.

DIRECT button (23)

Outputs the original sound source without applying

any effects.

Remote-control sensor (10)

Receives control signals from the remote controller.

DISPLAY (30)

Displays various information about the currently

selected input source.

TUNING UP/DOWN buttons (26, 29)

When AM, FM or SAT RADIO is selected, the

TUNING [UP ]/[ DOWN] buttons are used for

radio tuning.

DIRECT TUNING button (26)

When you know the frequency for the station you

want to listen to, you can select the station by

entering the frequency directly using this button and

number buttons. When SAT RADIO is selected, you

can select the channel number.

CATEGORY button

Used to select a category for Satellite Radio

stations.

PRESET [ ] button (27)

Selects a station from ones you preset.

CHARACTER button

Used to label the FM or AM station preset number.

RT/PTY/TP button (29)

On the European model, this is the RT/PTY/TP

button, and it’s used with RDS (Radio Data

System). See “Using RDS (European Models

Only)” on page 28.

Number buttons (26, 27, 30)

Used to select a station by entering the frequency

directly or to label the station preset number.

ENTER button

Used to select satellite radio stations.

PRESET

[]

button (27)

Selects a station from ones you preset.

DIMMER button (22)

Adjusts the display brightness.

SCAN

button (29)

Used to ﬁnd a station in RDS broadcasting.

CHARACTER

button

Used to label the FM or AM station preset number.

DIMMER button (22)

Adjusts the display brightness.

MASTER VOLUME control (21)

Sets the volume of the receiver.

BALANCE control (23)

This control is for adjusting the sound level balance

between the left and right channel for speakers and

headphones.

TREBLE control (23)

This control is for adjusting the level of treble

sounds.

BASS control (23)

This control is for adjusting the level of bass

sounds.

TUNING MODE button (26, 27)

Selects the Auto or Manual tuning mode for AM

and FM radio.

MEMORY button (27)

Used when storing or deleting radio presets.

T Input selector buttons (21, 24, 26)

Select the input sources.

The TAPE 2 button is also used to monitor the

recorded sound.

U STANDBY indicator (20)

Lights up when the receiver is on Standby and

ﬂashes while a signal is being received from the

remote controller.

V PHONES jack (22)

This 1/4-inch phone jack is for connecting a

standard pair of stereo headphones for private

listening.

TX-85228222_En.book 7 ページ２００６年５月４日木曜日午前１１時５１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-8522 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-8522

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info