Bedienungsanleitung Onkyo TX-DS494 (Seite 12 von 36) (Englisch)

553751

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Example of how to connect your equipment

Here is explanation of how to connect the main components to the

TX-DS494 in the standard manner. There are many ways that any

one component can be connected, and it is up to you to decide

which method best fits your situation. The directions given here

are only one option and should only be thought of as such. It is best

to fully understand the nature of each connector and terminal as

well as each of your components and their features to ascertain

which method of connection is best.

• Be sure to always refer to the instruction manual that came

with the component that you are connecting.

• Do not plug in the power cord until all connections have been

made.

• For input jacks, red connectors (marked R) are used for the

right channel, white connectors (marked L) are used for the

left channel, and yellow connectors (marked VIDEO) are used

for video connection.

• Insert all plugs and connectors securely. Improper connections

can result in noise, poor performance, or damage to the

equipment.

• Do not bind audio connection cables with power cords and

speaker cables. Doing so may adversely effect the sound

quality.

For a detailed explanation of how to connect the devices given

below, refer to the pages listed.

Speakers: See page 17

Radio antenna: See page 18

Setting the digital inputs

When connecting digital source components to the DIGITAL

INPUT jacks on the rear panel, assign the input source button on

the front panel to either a DIGITAL INPUT OPTICAL or

COAXIAL jack depending on the type of connector on the digital

source components. The DVD, CD, VIDEO 1, VIDEO 2 and

TAPE inputs can be assigned to the DIGITAL INPUT jacks.

With the initial setting, the OPTICAL connector is assigned to the

CD input, COAXIAL 1 is assigned to the DVD input and

COAXIAL 2 is assigned to the VIDEO 1 input, and no input

connector is assigned to the VIDEO 2 and TAPE inputs.

– – – – – :

Available for digital input but not set in initial setting.

: Not available for digital input.

For example, follow the steps below to assign OPTICAL to the

DVD device connected to the DIGITAL INPUT OPTICAL jack.

1. Press the DVD Input Selector button.

The DVD input is selected and “DVD” appears in the display.

2. Press the DIGITAL INPUT button.

The current DVD setting (COAX 1) appears.

3. Press the DIGITAL INPUT button repeatedly to

select “OPT”.

Pressing the DIGITAL INPUT button repeatedly will change

the setting as follows:

About five seconds after “OPT” is selected, the original

display appears and the setting is completed.

If you have selected digital input, you can also select the input

signal format (refer to “Setting the input signal format” on

page 23).

Note:

Do not assign a single DIGITAL INPUT jack to more than one

source.

For example, if you assign the OPTICAL jack to the DVD input,

since the OPTICAL jack is assigned to the CD input by the initial

setting, it would result in assigning a single OPTICAL jack to both

the CD and DVD inputs.

Whenever you assign a DIGITAL INPUT jack to a different

source from the initial setting, be sure to change the initial setting

for the jack in advance.

Improper connection

Inserted completely

Select if connected to DIGITAL INPUT

OPTICAL.

Select if connected to DIGITAL INPUT

COAXIAL 1.

Select if connected to DIGITAL INPUT

COAXIAL 2.

Select if the input source is not from a

digital input jack.

Default setting

Input source Digital input

CD OPTICAL

PHONO

TAPE – – – – –

VIDEO 2 – – – – –

VIDEO 1 COAXIAL 2

DVD COAXIAL 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS494 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS494

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info