Bedienungsanleitung Onkyo TX-DS696 (Seite 33 von 64) (Englisch)

553753

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Using listening mode

Changing the listening mode

To change the listening mode during playback, press the listening

mode buttons on the remote controller.

You can also set the listening mode using the jog dial on the TX-

DS696. Push the jog dial repeatedly to cycle the listening mode from

Direct→Stereo→Surround→All Ch Stereo→Direct. Turn the jog

dial to change the listening mode in the same manner as DSP

/ on

the remote controller.

DIRECT: Changes the listening mode directly to the Direct

listening mode. If pressed, the listening mode for the selected input

source set in the Listening Mode Preset sub-menu is also changed to

the Direct listening mode.

STEREO: Changes the listening mode directly to the Stereo

listening mode. If pressed, the listening mode for the selected input

source set in the Listening Mode Preset sub-menu is also changed to

the Stereo listening mode.

SURR (Surround): Changes the listening mode to the surround

mode for the current input signal (e.g., Dolby Pro Logic II, Dolby

Digital, or DTS). If pressed, the listening mode for the selected input

source set in the Listening Mode Preset sub-menu is also changed to

the Surround listening mode.

For Dolby Pro Logic II, this button also changes the mode between

Dolby Pro Logic II Movie and Dolby Pro Logic II Music.

A.ST(All Channel Stereo): Changes the listening mode directly to

the Stereo listening mode. If pressed, the listening mode for the

selected input source set in the Listening Mode Preset sub-menu is

also changed to the All Channel Stereo listening mode.

DSP

/ : Changes the listening mode as shown below.

Direct ↔ Stereo ↔ Surround ↔ Orchestra ↔ Unplugged ↔

Studio-Mix ↔ TV Logic ↔ All Ch Stereo ↔ Direct.

If pressed, the listening mode for the selected input source set in the

Listening Mode Preset sub-menu is also changed.

Note:

If you want to switch between Dolby Pro Logic II Movie and Dolby

Pro Logic II Music at the TX-DS696, press the jog dial and select

“Surround” for the listening mode.

PUSH TO ENTER

DSP

MODE ADJ

TX-DS696 Remote controller

Using Cinema Re-Equalization

Depending on the listening mode, you can either turn Re-EQ on or

off. Re-EQ (re-equalization) takes the edginess or “brightness” out

of your home cinema sound to compensate for the fact that sound

mixed for theaters may sound too bright when played back through

speakers in the home environment.

Remote cotroller only

On: Select to turn on the re-equalization filter.

Off: Select to turn off the re-equalization filter.

Note:

The Re-EQ function is effective on the Dolby Pro Logic II Surround

and Dolby Digital Surround.

MUTING

HOME THEATER CONTROLLER

440M

STANDBY/ON

STANDBY

OFF

POWER

MASTER VOLUME

BASS

TREBLE

RECEIVER

696

PHONES

FM AM PHONO C

DTAPEDVD

REC OUT

ZONE

LEVEL

CH LEVEL

VIDEO

VCR

AUDIO

SELECTOR

TUNING PRESET

SMART

SCAN

NAVIGATOR

PRESET MEMORY

MODEDISPLAY DIMMER

PUSH TO ENTER

DSP

MODE ADJ

SETUP

RETURN

Re-EQ

Listening

mode

buttons

Jog dial

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS696 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS696

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info