Bedienungsanleitung Onkyo TX-DS777 (Seite 2 von 64) (Englisch)

553754

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

1. Read Instructions – All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions – The safety and operating instructions

should be retained for future reference.

3. Heed Warnings – All warnings on the appliance and in the op-

erating instructions should be adhered to.

4. Follow Instructions – All operating and use instructions should

be followed.

5. Water and Moisture – The appliance should not be used near

water – for example, near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool, and

the like.

6. Carts and Stands – The appliance

should be used only with a cart or stand

that is recommended by the manufac-

turer.

6A.An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven sur-

faces may cause the appliance and cart

combination to overturn.

7. Wall or Ceiling Mounting – The appliance should be mounted

to a wall or ceiling only as recommended by the manufacturer.

8. Ventilation – The appliance should be situated so that its loca-

tion or position does not interfere with its proper ventilation. For

example, the appliance should not be situated on a bed, sofa,

rug, or similar surface that may block the ventilation openings;

or if placed in a built-in installation, such as a bookcase or cabi-

net that may impede the flow of air through the ventilation open-

ings, there should be free space of at least 20 cm (8 in.) and an

opening behind the appliance.

9. Heat – The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (in-

cluding amplifiers) that produce heat.

10. Power Sources – The appliance should be connected to a power

supply only of the type described in the operating instructions or

as marked on the appliance.

11. Polarization – If the appliance is provided with a polarized

plug having one blade wider than the other, please read the

following information:

The polarization of the plug is a safety feature. The polarized

plug will only fit the outlet one way. If the plug does not fit

fully into the outlet, try reversing it. If there is still trouble, the

user should seek the services of a qualified electrician. Under

no circumstances should the user attempt to defeat the

polarization of the plug.

12. Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched by

items placed upon or against them, especially near plugs, conve-

nience receptacles, and the point where they exit from the appli-

ance.

13. Cleaning – The appliance should be cleaned only as recom-

mended by the manufacturer.

14. Power Lines – An outdoor antenna should be located away

from power lines.

15. Nonuse Periods – The power cord of the appliance should be

unplugged from the outlet when left unused for a long period of

time.

16. Object and Liquid Entry – Care should be taken so that objects

do not fall and liquids are not spilled into the enclosure through

openings.

17. Damage Requiring Service – The appliance should be

serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

18. Servicing – The user should not attempt to service the appliance

beyond that described in the operating instructions. All other

servicing should be referred to qualified service personnel.

19. Outdoor Antenna Grounding – If an outside antenna is con-

nected to the receiver, be sure the antenna system is grounded so

as to provide some protection against voltage surges and built up

static charges. Article 810 of the National Electrical Code,

ANSI/NFPA 70, provides information with regard to proper

grounding of the mast and supporting structure, grounding of

the lead-in wire to an antenna-discharge unit, size of grounding

conductors, location of antenna-discharge unit, connection to

grounding electrodes, and requirements for the grounding elec-

trode. See Figure 1.

FIGURE 1:

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRICAL CODE

Important Safeguards

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS

OUVRIR

AVIS

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

ELECTRIC

SERVICE

EQUIPMENT

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

S2898A

PORTABLE CART WARNING

S3125A

Onkyo TX-DS777 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info