Bedienungsanleitung Onkyo TX-DS787 (Seite 9 von 76) (Englisch)

553756

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Front panel facilities

PHONES jack

This is a standard stereo jack for connecting stereo headphones.

The audio for the front right and left speakers are sent to the

headphone speakers. When the headphones are plugged in, the

listening mode automatically changes to stereo and output to the

speakers is stopped.

AUDIO SELECTOR button

This button is used to select the type of audio input signal. Each

time pressed, the setting cycles from “AUTO” → “Multichannel”

→ “Analog” and back.

AUTO (automatic detection): With this setting, the TX-DS787

automatically detects whether the input signal is digital or

analog. When a digital signal is not input, then the analog

signal is played.

Multichannel: Select this setting to play back the input from the

component connected to the MULTI CHANNEL INPUT port.

This setting is effective when the Multichannel setting in the

Audio Setup sub-menu is set to “Yes” (see page 35).

Analog: Select this setting to play back the input from a source

component connected to an AUDIO IN jack. With this setting,

even if a digital signal is input from the same component, only

the analog signal will be output.

Input Source Buttons (DVD, VIDEO 1–4,

TAPE, FM, AM, PHONO, and CD)

These buttons are used to select the input source for the main zone.

To select the input source for the remote zone (Zone 2) or

recording out (Rec Out), first press the Zone 2 or Rec Out button,

and then the desired input source button.

VIDEO 4/VIDEO CAM INPUT

These inputs are for connecting video cameras and other such

equipment.

RT/PTY/TP (European models only) button

This button is only available on European models. Use this button

to help tune into the Radio Data System (RDS) for FM

broadcasting. RDS was developed within the European

Broadcasting Union (EBU) and is available in most European

countries. Each time the button is pressed, the display changes

from RT (radio text) to PTY (program type) to TP (traffic

program) and then back to RT again.

DIMMER (other than European models)

button

Press to set the brightness of the front display. There are 3 settings

available: normal, dark, and very dark.

• The dimmer control for the front display can also be performed

at the remote controller.

Front display

Front panel

POWER switch

Turns on and off the main power supply for the TX-DS787.

• Before turning on the power, make sure all cables are properly

connected.

• Turning on the TX-DS787 may cause a momentary power

surge that might interfere with other electrical equipment on

the same circuit. If this is a problem, plug the TX-DS787 into a

different electrical circuit.

STANDBY indicator

Lights when the TX-DS787 is in the standby state and flashes

when a signal is received from the remote controller.

STANDBY/ON button

Pressing this button while the main power is turned on the

STANDBY indicator lights up and the front display turns off.

Pressing it again returns it to the standby state. This state turns off

the display, disables control functions.

ZONE 2 indicator

Lights when a signal is output to the remote zone (Zone 2). When

the ZONE 2 indicator is off, then either output to the remote zone

is turned off or Rec Out is selected.

REC OUT/ZONE 2 buttons

These buttons allow you to use the TX-DS787 to output to a

remote zone (Zone 2) or to another component for recording

purposes (Rec Out). Press the REC OUT button to output the audio

and video signals to a recording component for recording

purposes. Press the ZONE 2 button to enjoy the output from the

TX-DS787 in a different room, which is referred to as a remote

zone (Zone 2).

When either button is pressed, the currently selected input source

for recording or outputting to the remote zone is displayed in the

front panel display. If “SOURCE” is displayed, then the same

input source as that selected for the main zone will be output.

To select an input source, press the desired button (REC OUT or

ZONE 2) and then press one of the input source button within 3

seconds. That source will be output for recording or viewing in the

remote zone. To turn off either the REC OUT or ZONE 2 output,

when “SOURCE” is displayed, press the button again. “OFF”

appears in the front display.

Notes:

• The Rec Out and Zone 2 buttons use the same circuit and

therefore cannot be used at the same time. When Rec Out is

selected, nothing is output to Zone 2, and vice versa.

• When not using Rec Out or Zone 2, turn off the signal. If

turned on and the connected component is not turned on, the

electric signal will still be sent through the circuitry and the

excess load may cause deterioration of the audio signal.

MASTER VOLUME dial

The MASTER VOLUME dial is used to control the volume for the

main zone. The volume for the remote zone (Zone 2) is

independent.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS787 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS787

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info