Bedienungsanleitung Onkyo TX-DS787 (Seite 32 von 76) (Englisch)

553756

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Speaker Setup

1.Speaker Setup

2.Input Setup

3.Listening Mode Setup

4.Preference

5.OSD Setup

|ENTER| Quit:|OSD|

1.Speaker Setup

1.Speaker Config

2.Speaker Distance

3.Level Calibration

4.Bass Peak Level

|ENTER| Quit:|OSD|

1-3.Level Calibration

a.Left : 0dB

b.Center : 0dB

c.Right : 0dB

d.Surr Right : 0dB

e.Surr Back R : 0dB

f.Surr Back L : 0dB

g.Surr Left : 0dB

h.Subwoofer : 0dB

Quit:|OSD|

a. Left

Sound comes from the front left speaker. Adjust the sound level

between –12 and 12 decibels in 1-decibel intervals.

b. Center

Sound comes from the center speaker. Adjust the sound level

between –12 and 12 decibels in 1-decibel intervals.

c. Right

Sound comes from the front right speaker. Adjust the sound level

between –12 and 12 decibels in 1-decibel intervals.

d. Surr Right

Sound comes from the surround right speaker. Adjust the sound

level between –12 and 12 decibels in 1-decibel intervals.

e. Surr Back R

Sound comes from the surround back right speaker. Adjust the

sound level between –12 and 12 decibels in 1-decibel intervals.

• This setting appears if set for two surround back speakers in

the Speaker Config sub-menu.

f. Surr Back L

Sound comes from the surround back (left) speaker. Adjust the

sound level between –12 and 12 decibels in 1-decibel intervals.

• This setting appears if set for two surround back speakers in

the Speaker Config sub-menu.

f. Surr Back

Sound comes from the surround back speaker. Adjust the sound

level between –12 and 12 decibels in 1-decibel intervals.

• This setting appears if set for one surround back speaker in the

Speaker Config sub-menu.

Note:

For audio using surround back right and surround back left

speakers, a separately-sold 2-channel power amplifier is required.

g. Surr Left

Sound comes from the surround left speaker. Adjust the sound

level between –12 and 12 decibels in 1-decibel intervals.

h. Subwoofer

Sound comes from the subwoofer. Adjust the sound level between

–15 and 12 decibels in 1-decibel intervals.

Calibrating the speaker levels

(1) When this sub-menu is entered, the TX-DS787 will emit a pink

noise from the front left speaker. At this time, the Master

volume automatically increases to the reference level (0dB).

Remember the level of this noise and then press the

cursor

button. (Note that this can be adjusted to any level between –

12 and 12 decibels in 1-decibel intervals.) The TX-DS787 will

now emit the pink noise from the center speaker.

(2) Using the

and cursor buttons, adjust the volume level of

the noise from the center speaker so that it is the same level as

the front left speaker. You can jog back and forth between the

speakers to help you compare the volume levels.

1.Speaker Setup

2.Input Setup

3.Listening Mode Setup

4.Preference

5.OSD Setup

|ENTER| Quit:|OSD|

1.Speaker Setup

1.Speaker Config

2.Speaker Distance

3.Level Calibration

4.Bass Peak Level

|ENTER| Quit:|OSD|

1-3.Level Calibration

a.Left : 0dB

b.Center : 0dB

c.Right : 0dB

d.Surr Right : 0dB

f.Surr Back : 0dB

g.Surr Left : 0dB

h.Subwoofer : 0dB

Quit:|OSD|

(Only one surround back speaker)

(Two surround back speakers)

(3) Press the cursor button again. The TX-DS787 will now emit

the pink noise from the front right speaker.

(4) Repeat steps (2) and (3) above for the front right and other

speakers until all speakers are adjusted to the same volume

level.

Notes:

• Speakers that you selected “No” or “None” for in the Speaker

Config sub-menu will not appear.

• To accurately set the output levels, it is recommended to use a

handheld sound pressure level (SPL) meter. Set the meter to C-

weighting and slow averaging. A Radio Shack

SPL meter or

equivalent is recommended. Using the internal channel noise

generators, set each channel so that you read a 75 decibel

sound pressure level.

1-3. Level Calibration sub-menu

Here you will set the volume for each speaker so that they are all

heard by the listener at the same level. This is especially important

for speaker layouts where the left and right speakers are at

different distances or in asymmetrical positions due to room

designs and configurations. These settings and the distance

settings performed above are vital to create the proper acoustics

required for the optimum sound space and dynamics.

Note:

The speaker level settings here are not effective for multi-channel

input sources. To adjust the speaker levels for multi-channel input

sources, you will need to use the CH SEL, LEVEL+, and LEVEL–

buttons on the RC-390M remote controller. See page 59.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS787 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS787

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info