Bedienungsanleitung Onkyo TX-DS787 (Seite 56 von 76) (Englisch)

553756

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Recording a source

To record an input source signal different from

that you are currently watching or listening to

This method outputs to the audio and video outputs the signal from

the input source that you select here. This allows you to record an

input source signal different from that which you are listening to or

watching at the time of recording.

1. Press the Rec Out button.

2. Within 3 seconds, press the input source

selector button of the input source signal that

you wish to record.

The signal from the selected input source will now be output to

the TAPE OUT, VIDEO 1 OUT, and VIDEO 2 OUT outputs

for recording.

Recording the video from one source and the

audio from another

You can add the sound from one source to the video of another

source to make your own video recordings.

Below is an example of recording the sound from a compact disc

player connected to CD IN and the video from a video camera

connected to VIDEO 4 IN to video cassette tape in a video cassette

recorder connected to the VIDEO 1 OUT jack.

1. Press the CD input source button.

2. Set “VIDEO 4” for the Video setting in the

Video Setup sub-menu of the OSD menu: Input

Setup → Video Setup → Video.

3. Insert a CD in the CD player and insert a tape

in the video camera connected to the VIDEO 4

IN.

4. Insert a video tape for recording in the video

cassette recorder connected to VIDEO 1 OUT.

5. Press the REC OUT button repeatedly until

“Rec Sel:SOURCE” appears in the front

display.

Now “CD” has been selected as the audio input source and

“VIDEO 4” as the video input source.

6. Start recording on the video cassette recorder

and start playing at the CD player and video

camera as desired.

Notes:

• If you change the input source during recording, you will

record the audio signals from the newly selected input source

and the video signals assigned to that input source.

• You cannot record the surround effects.

3. Start recording at the recording component as

desired.

To confirm the settings, press the Rec Out button. The current

settings will appear for 3 seconds in the front display.

Notes:

• Be aware that the remote (Zone 2) and recording (Rec Out)

outputs use the same circuit and therefore can be used at the

same time.

• You cannot record the surround effects.

• Digital signals input to the DIGITAL INPUT (COAXIAL) and

DIGITAL INPUT (OPTICAL) inputs will be output to the

DIGITAL OUTPUT (OPTICAL) outputs.

• There are some restrictions on recording digital signals. When

making digital recordings, consult the instruction manual that

came with your digital recording equipment (e.g., MD

recorder or DAT deck) to know what restrictions are imposed.

• You cannot record the source connected to the MULTI

CHANNEL INPUT connector.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS787 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS787

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info