Bedienungsanleitung Onkyo TX-DS787 (Seite 59 von 76) (Englisch)

553756

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Using remote controller

LIGHT: Illuminates the buttons.

SLEEP: Sets the sleep function.

• The SLEEP buttons enables you to set the TX-DS787 to

turn off automatically after a specified time period. If you

press it once, the TX-DS787 will turn off after 90 minutes.

Each time it is pressed thereafter, the remaining time until

the TX-DS787 turns off decreases by 10 minutes. While,

the sleep function is enabled, you can press the SLEEP

button to see how much time is left. To cancel the sleep

function, press the SLEEP button when the time displayed

is less than 10 minutes.

ON/STNBY: Turns on the TX-DS787 or puts it in standby.

DISPLAY: Changes the display.

• Same as the DISPLAY button on front panel of the TX-

DS787.

VOL

: Adjusts the volume.

CH : Selects the tuner preset stations.

TEST: Outputs a test tone for setting speaker levels.

• Use this button in conjunction with the LEVEL +/– and

CH SEL buttons to calibrate the speakers levels without

entering the OSD Menu. When TEST button is pressed,

the test noise (pink noise) is output. Use the LEVEL +/–

buttons to increase or decrease the sound level. Use the CH

SEL button to change from speaker to speaker. For a more

detailed explanation of how to calibrate the speaker levels,

see page 32.

MUTING: Activates the mute function.

Notes:

• The depth of the Late Night effect is determined by Dolby

Digital software. Some sounds may produce no or little effect.

• The Late Night function is effective only on Dolby Digital

encoded software.

CH SEL: Selects a speaker for changing the speaker output level.

• See TEST button above.

DIMMER: Adjusts the display brightness.

• There are three settings available: normal, dark and very

dark.

LEVEL +: Increases the speaker level.

• See TEST button above.

LEVEL –: Decreases the speaker level.

• See TEST button above.

Listening mode buttons

STEREO: Changes the listening mode directly to the Stereo

listening mode.

• If pressed, the listening mode for the selected input source

set in the Listening Mode Preset sub-menu is also changed

to the Stereo listening mode.

SURROUND: Changes the listening mode to the surround

mode for the current input signal (e.g., Dolby Pro Logic,

Dolby Digital, or DTS).

• If pressed, the listening mode for the selected input source

set in the Listening Mode Preset sub-menu is also changed

to the Surround listening mode. If Dolby Digital or DTS was

already set as the listening mode:

The operating mode for the 6.1-channel matrix playback

of sources that allow 6.1-channel matrix playback will

change as follows (see page 43):

Auto→On→Off→Auto...

DIRECT: Changes the listening mode directly to the Direct

listening mode.

• If pressed, the listening mode for the selected input source

set in the Listening Mode Preset sub-menu is also changed

to the Direct listening mode.

THX: Changes the listening mode to the THX listening mode.

• If pressed, the listening mode for the selected input source

set in the Listening Mode Preset sub-menu is also changed

to the THX listening mode. The operating mode for the

THX Surround EX playback of sources that allow THX

Surround EX playback will change as follows (see page

43):

Auto→On→Off→Auto...

* “Auto” only appears for Dolby Digital sources.

DSP

/ : Changes the listening mode as shown below.

Direct ↔ Stereo ↔ Theater-Dimensional ↔ Surround ↔

THX ↔ Mono Movie ↔ Enhanced7 ↔ Orchestra ↔

Unplugged ↔ Studio-Mix ↔ TV Logic ↔ All Ch Stereo

↔ Direct.

• If pressed, the listening mode for the selected input source

set in the Listening Mode Preset sub-menu is also changed.

• This button mutes the playback sound immediately. This

can be useful, for example, when you receive a telephone

call while listening to music or another source. When

pressed, “Muting” is displayed on the TX-DS787. Press

the MUTING button again to turn the sound back on.

AUDIO: For selecting the audio input signal. The setting

changes from “AUTO” to “Multichannel” to “Analog” and

back each time this button is pressed.

INPUT SELECTOR: Selects an input source.

• Same as the input selector buttons on front panel of the

TX-DS787.

Re-EQ: Depending on the listening mode, you can turn the

cinema re-equalization function on or off.

• The re-equalization function takes the edginess or

“brightness” out of your home cinema sound to

compensate for the fact that sound mixed for theaters may

sound too bright when played back through speakers in the

home environment.

LATE NIGHT: Sets “High,” “Low,” or “Off” for the late

night function.

• Cinema sound has a vast dynamic range; therefore, to hear

the quieter sounds such as human conversations, they must

be played back at larger volumes. When this parameter is

set to “High” or “Low,” the dynamic range of the sound is

narrowed down to allow you to easily hear minute sounds

at low volumes. This function is especially useful if you

wish to play a movie at low volumes during the nighttime.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS787 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS787

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info