Bedienungsanleitung Onkyo TX-DS787 (Seite 71 von 76) (Englisch)

553756

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

FM/AM TUNER

AM stations cannot be received.

• AM loop antenna is not connected.

➞ Connect the included AM loop antenna to the AM antenna

terminals.

Buzzing noise on AM stations (particularly

noticeable at night or with weak stations).

• Noise from electrical apparatus such as fluorescent lamp.

➞ Move the AM loop antenna to different position.

➞ Set up an outdoor AM antenna.

Noise is heard at high-pitched sounds on AM

stations.

• Noise from TV set.

➞ Place the AM loop antenna as far as possible from the TV.

➞ Move unit away from TV set.

Crackling noise on both AM and FM stations.

• Noise caused by fluorescent lamp being turned on and off.

➞ Move antenna as far as possible from the fluorescent lamp.

• Noise from automobile ignition.

➞ Install an FM outdoor antenna as far as possible from the

road.

➞ Change the position or direction of the outdoor antenna.

The indicators light for stereo reception, but

sound is distorted and stereo separation is bad.

• Station is too strong.

➞ Change to FM indoor antenna.

• Multiple reflection of the radio waves because of tall buildings

or mountains.

➞ Use antenna that has better directivity and select a point

where distortion is least.

Indicators for stereo reception flicker and hiss is

heard on FM stations.

• Station is too weak.

➞ Install an outdoor FM antenna.

• Stereo FM broadcasts cover only about half the distance of an

ordinary broadcast.

➞ Change the position or direction of the outdoor antenna.

No preset station is recalled.

• Power cord has been unplugged or the POWER switch has

been turned off for a long time.

➞ The memory contents are lost. Store all stations again.

VIDEO and AUDIO

Desired picture does not appear.

• Improper connection.

➞ Check the connection again. Insert the plugs and

connectors completely.

• Video Setup sub-menu of Input Setup menu settings are

incorrect.

➞ Check Settings.

No OSD Menu display.

• Improper connection.

➞ Check connections.

• OSD Menu is displayed when monitor is connected to VIDEO

or S VIDEO of MONITOR OUT.

➞ Confirm connections.

• Monitor is connected to MONITOR OUT VIDEO when the

OSD output is set to “S Video” or monitor is connected to

MONITOR OUT S VIDEO when the OSD output is set to

“Video.”

➞ Check the OSD Config sub-menu of OSD Setup (page 29).

Picture and sound do not match.

• Improper connection.

➞ Check connections.

• Video Setup sub-menu of Input Setup menu settings are

incorrect.

➞ Check settings.

No sound, or sound of the selected source is not

heard.

• Digital Setup sub-menu of Input Setup menu settings are

incorrect.

➞ Check settings.

No picture appears on the TV screen (or monitor).

• TV (or monitor) is not set to receive the output signals from the

receiver.

➞ Set the TV (or monitor) to the receiver input.

• Video cable is not connected securely.

➞ Check connections.

• S VIDEO IN signal is output at VIDEO OUT and S VIDEO

OUT, but VIDEO IN signal is only output at VIDEO OUT.

Also, COMPONENT VIDEO IN signal is only output at

COMPONENT VIDEO OUT.

➞ Check the input and output signals.

Troubleshooting guide

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS787 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS787

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info