Bedienungsanleitung Onkyo TX-DS797 (Seite 10 von 76) (Englisch)

553757

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Remote controller

SEND/LEARN indicator

This indicator acts as a guide when commands are programmed into

or sent by the remote controller. It also warns the user when an error

is made or battery power is low.

ON/STDBY button [23]

ON: Turns on the TX-DS797.

STDBY: Places the TX-DS797 in the standby state.

Be aware that pressing the STDBY button only places the TX-

DS797 in standby and does not turn the power completely off.

SLEEP button [52]

Sets the sleep function.

The SLEEP button enables you to set the TX-DS797 to turn off

automatically after a specified time period.

DIRECT MACRO button [68]

For executing and programming the Direct Macro function.

MODE buttons and indicators [56-59, 62-69]

For selecting the component to be operated by the remote controller.

When a MODE button is pressed, it will light green for 8 seconds.

The selected MODE button will also light whenever any other

operation button is pressed to tell you which mode the remote

controller is in.

RETURN button [27]

For entering the selected setting and returning to the previous menu.

CH , DISC button [47, 56-58, 62, 63]

When in the RCVR mode, for selecting a tuner preset channel.

For selecting the disc to be played back for components with disc

changers when in the DVD or CD modes.

CH SEL/TOP MENU button

CH SEL: For selecting the speaker for level adjustment when in the

RCVR mode. Used together with the LEVEL

/ buttons. [52]

TOP MENU: When in the DVD mode, for displaying the menu

screen(s) recorded on DVD media. [58]

Front panel facilities

RETURN button [27]

Press to exit the Main menu level or go back one level up.

MEMORY button [47]

This button is used to assign the radio station that is currently tuned

in to a preset channel or delete a previously preset station.

FM MODE button [46]

If you are listening to an FM radio station in stereo and the sound

cuts out or there is a great deal of noise, switch from STEREO to

MONO. Each time this button is pressed, the AUTO indication turns

on and off, and the stereo mode changes from AUTO to MONO and

vice versa.

LISTENING MODE buttons [51]

Press these buttons to select a listening mode for the current input

source.

STEREO: Selects for normal stereo output.

SURROUND: Selects for the Dolby Pro Logic, Neo:6, Dolby

Digital, or DTS listening modes.

THX: Selects for the THX listening mode.

DSP

/ : Switches to the listening mode before or after the current

one.

DIRECT button [51]

The direct mode outputs the sound without sound adjustment or

filtration. In the direct mode, even if the Subwoofer setting of the

Speaker Config sub-menu is set to “Yes,” no sound is output from

the subwoofer and the left and right channels are output, as is, to the

left and right speakers. Even for multichannel input signals, the

sounds are not passed through the sound adjustment circuits.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS797 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS797

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info