Bedienungsanleitung Onkyo TX-DS898 (Seite 66 von 72) (Englisch)

517113

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Using a Macro function

Programming a Macro function

You can program a different macro into the MODE MACRO button

for each of the eight MODE buttons. The macro is then executed by

pressing the appropriate MODE button and then pressing the MODE

MACRO button. For example, to program the macro described

above into the CD MODE button, perform the steps given below.

1. Press and hold down the desired MODE button (in

this case, the CD MODE button), press the MODE

MACRO button, and then release both buttons.

When you press the CD MODE button, the SEND/LEARN

indicator lights and the CD MODE button lights green. When

you press the MODE MACRO button, the indicator turns off.

When you release the buttons, the indicator flashes and lights

again.

2. Press the operation buttons you wish to program in

order (in this case, press RCVR MODE → ON → CD

(INPUT SELECTOR) → CD MODE → playback ( )

button).

When you press each button, the SEND/LEARN indicator turns

off. When you release the button, the indicator lights.

3. Press the MODE MACRO button to complete the

programming.

The SEND/LEARN indicator flashes twice slowly.

4. Run the macro to check to see if the macro has been

properly programmed.

Notes:

• You may program up to 16 button operations into each macro

function. If you try to program a 17th operation, it will be

ignored, and programming is stopped.

• If no button is pressed for more than 30 seconds during the

programming, the SEND/LEARN indicator flashes three times

quickly, and the remote controller exits the programming mode.

Resume from Step 1.

• If you perform an invalid operation during programming, the

SEND/LEARN indicator flashes three times quickly, and the

remote controller exits the programming mode. Resume from

Step 1.

Running a Macro function

Perform the procedure below to run a macro function that you have

programmed into the remote controller. After programming a macro,

you should always run it at least once to make sure that it has been

programmed properly.

1. Point the remote controller at the TX-DS898 and

press the CD MODE button.

2. Press the MODE MACRO, and verify that the devices

operate properly.

It may take a while for the macro to finish transmitting, so be

sure to continue pointing the remote controller at the device until

the SEND/LEARN indicator turns off.

Tips:

• If you erase or change the command of a button programmed in

a macro, that operation of that button will no longer work in the

macro. In this case, it will be necessary for you to reprogram the

macro in order to avoid incorrect operation.

• The codes programmed into a macro will be transmitted at an

interval of 0.5 seconds. However, some devices may not be able

to complete one operation in 0.5 seconds and may miss the next

code. In this case, after pressing one operation button, you can

press the same MODE button again before pressing the next

operation button to add another 0.5 seconds between the two

operations.

(CD playback)

(INPUT

SELECTOR)

What is a Macro function?

A Macro function enables you to program a series of button

operations (up to 16) on the remote controller into a single button.

For example, to play a compact disc player connected to the TX-

DS898 normally, you must perform the following steps:

1. Press the RCVR MODE button.

2. Press the ON button.

3. Press the CD (INPUT SELECTOR) button.

4. Press the CD MODE button.

5. Press the playback ( ) button.

By using the macro function, you can perform the above five

operations by only pressing two buttons.

MODE MACRO

CD MODE

RCVR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS898 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info