Bedienungsanleitung Onkyo TX-NR 717 (Seite 33 von 148) (Englisch)

492647

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Turning On & Basic Operations

En-33

Using RDS (excluding North American and

Taiwanese models)

When tuned into an RDS station, the RDS indicator lights.

When the station is broadcasting text information, the text

can be displayed.

■ What is RDS?

RDS stands for Radio Data System and is a method of

transmitting data in FM radio signals. It was developed by

the European Broadcasting Union (EBU) and is available

in most European countries. Many FM stations use it these

days. In addition to displaying text information, RDS can

also help you find radio stations by type (e.g., news, sport,

rock, etc.).

The AV receiver supports four types of RDS information:

PS (Program Service)

When tuned to an RDS station that’s broadcasting PS

information, the station’s name will be displayed. Pressing

DISPLAY will display the frequency for 3 seconds.

RT (Radio Text)

When tuned to an RDS station that’s broadcasting text

information, the text will be shown on the AV receiver’s

display as described in the next section.

PTY (Program Type)

This allows you to search for RDS radio stations by type.

TP (Traffic Program)

This allows you to search for RDS radio stations that

broadcast traffic information.

Note

• In some cases, the text characters displayed on the AV receiver

may not be identical to those broadcast by the radio station. Also,

unexpected characters may be displayed when unsupported

characters are received. This is not a malfunction.

• If the signal from an RDS station is weak, RDS data may be

displayed intermittently or not at all.

■ Displaying Radio Text (RT)

■ Finding Stations by Type (PTY)

You can search for radio stations by type.

■ Listening to Traffic News (TP)

You can search for stations that broadcast traffic news.

RDS works only in areas where RDS broadcasts are

available.

Press RT/PTY/TP once.

The RT information scrolls across the AV receiver’s

display.

Note

• The message “Waiting” may appear while the AV receiver

waits for the RT information.

• If the message “No Text Data” appears, no RT information

is available.

Press RT/PTY/TP twice.

The current program type appears on the AV

receiver’s display.

Use PRESET e/r to select the type of program

you want.

See the table shown later in this chapter.

To start the search, press ENTER.

The AV receiver searches until it finds a station of the

type you specified, at which point it stops briefly

before continuing with the search.

When a station you want to listen to is found, press

ENTER.

If no stations are found, the message “Not Found”

appears.

Press RT/PTY/TP three times.

If the current radio station is broadcasting TP (Traffic

Program), “[TP]” will appear on the AV receiver’s

display. If “TP” without square brackets appears, this

means that the station is not broadcasting TP.

To locate a station that is broadcasting TP, press

ENTER.

The AV receiver searches until it finds a station that’s

broadcasting TP.

If no stations are found, the message “Not Found”

appears.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR 717 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR 717

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info