Bedienungsanleitung Onkyo TX-NR 717 (Seite 53 von 148) (Englisch)

492647

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Advanced Operations

En-53

Main Menu Input/Output Assign

Monitor Out

On the “Monitor Out” settings, you can select whether or

not to have the video sources’ images output through the

HDMI output.

If you connect your TV to the HDMI output, the “Monitor

Out” setting is automatically set and composite video and

component video sources are upconverted

and output.

Note

• See “Video Connection Formats” (➔ page 90) for charts

showing how the “Monitor Out” and “Resolution” settings

affect the video signal flow through the AV receiver.

■ Monitor Out

` Main

Select this if your TV is connected to HDMI OUT

MAIN.

` Sub:

Select this if your TV is connected to HDMI OUT

SUB.

` Both:

Select this if your TVs are connected to HDMI OUT

MAIN and HDMI OUT SUB. Video signals are

output from both HDMI outputs at the resolution

supported by both TVs.

■ Resolution

` Through:

Select this to pass video through the AV receiver at

the same resolution and with no conversion.

` Auto

Select this to have the AV receiver automatically

convert video at resolutions supported by your TV.

` 480p (480p/576p), 720p, 1080i, 1080p:

Select the desired output resolution.

` 1080p/24:

Select this for 1080p output at 24 frames per second.

` 4K Upscaling:

Select this for an output resolution four times that of

1080p. Depending on the resolution supported by

your TV, it will result in either 3840 × 2160 or 4096

× 2160 pixels.

You can specify the output resolution for HDMI OUT

MAIN and have the AV receiver upconvert the picture

resolution as necessary to match the resolution supported

by your TV.

Tip

• You can see the picture by pressing ENTER to check the

“Resolution” setting (excluding NET input source).

Note

• Depending on the incoming video signal, the video playback may

not be smooth or the vertical resolution may be lowered. In this

case select anything other than “1080p/24”.

• If the “Monitor Out” setting is set to “Sub”, this setting is fixed

to “Through”.

• If the “Monitor Out” setting is set to “Both”, this setting is fixed

to “Auto”.

• With some TVs, there may be no picture when this setting is set

to “4K Upscaling”.

HDMI Input

If you connect a video component to an HDMI input, you

must assign that input to an input selector. For example, if

you connect your Blu-ray Disc/DVD player to HDMI IN 2,

you must assign “HDMI2” to the “BD/DVD” input

selector.

If you’ve connected your TV to the AV receiver with an

HDMI cable, composite video and component video

sources can be upconverted

and output by the HDMI

output. You can set this for each input selector by selecting

the “-----” option. See “Video Connection Formats” for

more information on video signal flow and upconversion

(➔ page 90).

Here are the default assignments.

Input/Output Assign

1 2 3 4 5

“Setup”

OUT

Composite video,

component video

HDMI

Composite video,

component video

Input selector Default assignment

BD/DVD HDMI1

CBL/SAT HDMI2

STB/DVR HDMI3

GAME HDMI4

HDMI5

AUX FRONT (Fixed)

TV/CD -----

PHONO -----

OUT

Composite video,

component video

HDMI

Composite video,

component video

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR 717 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR 717

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info