Bedienungsanleitung Onkyo TX-NR 717 (Seite 63 von 148) (Englisch)

492647

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Advanced Operations

En-63

■ Picture Mode

*1*3

` Custom:

All settings can be performed manually.

` Cinema:

Select when the picture source is a movie or alike.

` Game:

Select when the video source is a game console.

` Through:

Does not adjust picture quality (changes resolution).

` Direct:

Does not adjust picture quality (does not change

resolution). The video coming from an analog input

and output by the HDMI output is processed in the

same way as “Through”.

With “Picture Mode”, you can change the following

settings to be suitable for the movie or game screen by one

operation; “Game Mode”, “Film Mode”, “Edge

Enhancement”, “Noise Reduction”, “Brightness”,

“Contrast”, “Hue”, “Saturation” or “Color

Temperature”.

■ Game Mode

*4*5*6

` Off

` On

If video signal delay occurs during playback on a video

component (i.e., game console), select the corresponding

input source and set the “Game Mode” setting to “On”.

The delay will decrease but in return the picture quality will

become poor.

■ Film Mode

*4*6

` Video:

“Film Mode” detection is not applied and the input

signal is handled as a video source.

` Auto:

Detects whether the input signal is a video or a

movie. If it is a movie, the appropriate conversion is

applied.

The AV receiver will adjust to the picture source,

automatically converting it to the appropriate progressive

signal and reproducing the natural quality of the original

picture.

■ Edge Enhancement

*4*6*7

` Off

` Low

` Mid

` High

With this setting, you can make the picture appear sharper.

■ Noise Reduction

*4*6*7

` Off

` Low

` Mid

` High

With this setting, you can reduce noise appearing on the

screen. Select the desired level.

■ Brightness

*1*4*6

` –50 to 0 to +50

With this setting, you can adjust the picture brightness.

“–50” is the darkest. “+50” is the brightest.

■ Contrast

*1*4*6

` –50 to 0 to +50

With this setting, you can adjust contrast. “–50” is the

least. “+50” is the greatest.

■ Hue

*1*4*6

` –50 to 0 to +50

With this setting, you can adjust the color hue between

“–50” and “+50”.

■ Saturation

*1*4*6

` –50 to 0 to +50

With this setting, you can adjust saturation. “–50” is the

weakest color. “+50” is the strongest color.

■ Color Temperature

*4*6

` Warm

` Normal

` Cool

With this setting, you can adjust the color temperature.

Note

•“Picture Adjust”

cannot be used when:

–The NET input selector is selected, or

–“Monitor Out” is set to “Sub” (➔ page 53).

This procedure can also be performed on the remote controller

by using the Quick Setup (➔ page 48).

When a 3D video source is input, “Wide Mode” is fixed to

“Full”.

When “Metadata Compatible” is enabled (➔ page 57),

“Picture Mode” is fixed to “Direct”.

When the “Picture Mode” setting is set to anything other than

“Custom”, this setting cannot be used.

If the “Resolution” setting is set to “4K Upscaling”

(➔ page 53), this setting is fixed at “Off”.

Press CLR if you want to reset to the default value.

If the “Game Mode” setting is set to “On”, this setting is fixed

at “Off”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR 717 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR 717

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info