Bedienungsanleitung Onkyo TX-NR 818 (Seite 21 von 156) (Englisch)

492662

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Connections

En-21

Note

Do not connect the AV receiver’s USB port to a USB port on

your computer. Music on your computer cannot be played

through the AV receiver in this way.

Only the front-panel USB input is compatible with

iPod/iPhone.

When the USB input is selected, you can input video signals

from the AUX INPUT VIDEO jack. Video signals input from

AUX INPUT VIDEO will be output from the MONITOR

OUT V and HDMI output jacks.

Connect a turntable (MM) that has a built-in phono preamp to

TV/CD IN, or connect it to PHONO IN with the phono

preamp turned off. If your turntable (MM) doesn’t have a

phono preamp, connect it to PHONO IN. If your turntable has

a moving coil (MC) type cartridge, you’ll need a commercially

available MC head amp or MC transformer to connect to

PHONO IN. See your turntable’s manual for details.

If your turntable has a ground wire, connect it to the AV

receiver’s GND screw. With some turntables, connecting the

ground wire may produce an audible hum. If this happens,

disconnect it.

When you connect your personal computer to PC IN and select

the PC input selector, the video of the personal computer is

output from the HDMI outputs. However, if you have assigned

the HDMI inputs to the PC input selector, the AV receiver will

output signals received from the HDMI inputs instead of

signals from PC IN. To have the signals output from PC IN,

select “-----” for “PC” in the “HDMI Input” setting

(➔ page 58).

• With connection D, you can enjoy Dolby Digital and

DTS. (To listen in Zone 2/3 as well, use D and F.)

• With connection F, you can enjoy audio from external

components while you are in Zone 2/3.

• With connection F, if your Blu-ray Disc/DVD player

has both the main stereo and multichannel outputs, be

sure to connect the main stereo.

With u (Remote Interactive), you can use the following

special functions:

■ System On/Auto Power On

When you start playback on a component connected via

u, while the AV receiver is on standby, the AV

receiver will automatically turn on and select that

component as the input source.

■ Direct Change

When playback is started on a component connected via

u, the AV receiver automatically selects that

component as the input source.

■ Remote Control

You can use the AV receiver’s remote controller to

control your other u-capable Onkyo components,

pointing the remote controller at the AV receiver’s

remote control sensor instead of the component. You

must enter the appropriate remote control code first

(➔ page 86).

Note

•Use only u cables for u connections. u cables are supplied

with Onkyo components.

• Some components have two u jacks. You can connect either

one to the AV receiver. The other jack is for connecting

additional u-capable components.

• Connect only Onkyo components to u jacks. Connecting other

manufacturer’s components may cause a malfunction.

• Some components may not support all u functions. Refer to the

manuals supplied with your Onkyo components.

• While Zone 2/3 is on, the System On/Auto Power On and Direct

Change u functions do not work.

No. Jack/Port Components

COMPONENT VIDEO

MONITOR OUT TV, projector, etc.

IN 1 (BD/DVD) Blu-ray Disc/DVD player,

RI dock

✔

IN 2 (CBL/SAT) Satellite/cable set-top box,

RI dock, etc.

✔

PC IN

Personal computer

Connecting Onkyo RI Components

Make sure that each Onkyo component is

connected with an analog audio cable (connection

F in the hookup examples) (➔ page 20).

Make the u connection (see the illustration).

If you’re using an RI Dock, or cassette tape deck,

change the Input Display (➔ page 48).

L R

ANALOG

AUDIO OUT

L R

ANALOG

AUDIO OUT

e.g., cassette tape deck

RI Dock

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR 818 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR 818

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info