Bedienungsanleitung Onkyo TX-NR 818 (Seite 35 von 156) (Englisch)

492662

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Turning On & Basic Operations

En-35

■ Selecting Presets

■ Deleting Presets

Using RDS (excluding North American

models)

When tuned into an RDS station, the RDS indicator lights.

When the station is broadcasting text information, the text

can be displayed.

■ What is RDS?

RDS stands for Radio Data System and is a method of

transmitting data in FM radio signals. It was developed by

the European Broadcasting Union (EBU) and is available

in most European countries. Many FM stations use it these

days. In addition to displaying text information, RDS can

also help you find radio stations by type (e.g., news, sport,

rock, etc.).

The AV receiver supports four types of RDS information:

PS (Program Service)

When tuned to an RDS station that’s broadcasting PS

information, the station’s name will be displayed. Pressing

DISPLAY will display the frequency for 3 seconds.

RT (Radio Text)

When tuned to an RDS station that’s broadcasting text

information, the text will be shown on the AV receiver’s

display as described in the next section.

PTY (Program Type)

This allows you to search for RDS radio stations by type.

TP (Traffic Program)

This allows you to search for RDS radio stations that

broadcast traffic information (➔ page 36).

Note

• In some cases, the text characters displayed on the AV receiver

may not be identical to those broadcast by the radio station. Also,

unexpected characters may be displayed when unsupported

characters are received. This is not a malfunction.

• If the signal from an RDS station is weak, RDS data may be

displayed intermittently or not at all.

■ Displaying Radio Text (RT)

■ Finding Stations by Type (PTY)

You can search for radio stations by type.

Press MEMORY again to store the station or

channel.

The station or channel is stored and the preset number

stops flashing.

Repeat this procedure for all of your favorite AM/FM

radio stations.

To select a preset, use PRESET e/r on the AV

receiver, or the remote controller’s CH +/–.

Tip

• You can also use the remote controller’s number buttons to

select a preset directly.

Select the preset that you want to delete.

See the previous section.

While holding down MEMORY, press TUNING

MODE.

The preset is deleted and its number disappears from

the AV receiver’s display.

RDS works only in areas where RDS broadcasts are

available.

Press RT/PTY/TP once.

The RT information scrolls across the AV receiver’s

display.

Note

• The message “Waiting” may appear while the AV receiver

waits for the RT information.

• If the message “No Text Data” appears, no RT information

is available.

Press RT/PTY/TP twice.

The current program type appears on the AV

receiver’s display.

Use PRESET e/r to select the type of program

you want.

See the table shown later in this chapter.

To start the search, press the enter button.

The AV receiver searches until it finds a station of the

type you specified, at which point it stops briefly

before continuing with the search.

When a station you want to listen to is found, press

the enter button.

If no stations are found, the message “Not Found”

appears.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR 818 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR 818

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info