Bedienungsanleitung Onkyo TX-NR 818 (Seite 49 von 156) (Englisch)

492662

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Turning On & Basic Operations

En-49

The Whole House Mode is useful when you want to add

extra background music to your home party; this allows

you to enjoy the same stereo music as the main room in

separate rooms (Zone 2/3).

The Whole House Mode selects the same input source for

Multi Zone as the main room’s.

See also:

• “Speaker Setup” (➔ page 59)

• “Multi Zone” (➔ page 78)

You can set which speakers you want to use by priority.

You can temporarily mute the output of the AV receiver.

Using the Whole House Mode

Press WHOLE HOUSE MODE on the front panel.

To cancel the Whole House Mode, change the input

source for the main room or select a listening mode

(➔ page 40).

Note

• The Whole House Mode only supports analog audio.

• To adjust the volume of Multi Zone, switch the AV receiver

to Multi Zone control. See “Adjusting the Volume for

Zones” (➔ page 80) for the volume adjustment of Multi

Zone.

• The Whole House Mode is not available in the following

cases:

–The “Audio TV Out” setting is set to “On”

(➔ page 75).

–“HDMI Control(RIHD)” is set to “On” (➔ page 75)

and you’re listening through your TV speakers.

– Digital Processing Crossover Network is used

(➔ page 63).

Selecting Speaker Layout

Press RECEIVER followed by SP (speaker layout)

repeatedly to select:

■ 9.1 ch playback

` Speaker Layout:SB/FH:

The sounds from surround back and front high

speakers are output by priority.

` Speaker Layout:SB/FW:

The sounds from surround back and front wide

speakers are output by priority.

` Speaker Layout:FH/FW:

The sounds from front high and front wide

speakers are output by priority.

■ 7.1 ch playback

` Speaker Layout:FH:

The sound from front high speakers is output by

priority.

` Speaker Layout:FW:

The sound from front wide speakers is output by

priority.

` Speaker Layout:SB:

The sound from surround back speakers is

output by priority.

Note

• This setting is not available in either of the following cases:

–The “Speakers Type (Front)” setting is set to “Bi-Amp”

or “Digital Crossover”.

–The “Powered Zone 2/3” setting is set to “Yes” and

Zone 2/3 is turned on.

Important:

• The following layouts are only available when the

“Preout to External Amplifier” setting (➔ page 59)

and all corresponding speakers are enabled.

• Playback conditions may be limited depending on the set-

tings in “Speaker Settings” (➔ page 59) and “Speaker

Configuration” (➔ page 60).

• When a listening mode which doesn’t support front high,

front wide or surround back speakers is used, this setting

cannot be selected.

Muting the AV Receiver

Press RECEIVER followed by MUTING.

The output is muted and the MUTING indicator

flashes on the AV receiver’s display.

Tip

• To unmute, press MUTING again or adjust the volume.

• Muting is automatically cancelled when the AV receiver is

set to standby.

Using Headphones

Connect a pair of stereo headphones with a

standard plug (1/4 inch or 6.3 mm) to the PHONES

jack.

While the headphones plug is inserted in the PHONES

jack, = indicator lights.

Note

• Always turn down the volume before connecting your

headphones.

• While the headphones plug is inserted in the PHONES

jack, the speakers are turned off. (The Powered Zone 2/3

speakers are not turned off.)

• When you connect a pair of headphones, the listening mode

is set to Stereo, unless it’s already set to Stereo, Mono,

Direct, or Pure Audio.

• If you connect an iPod or iPhone to the USB port on the AV

receiver, no sound will be output from the headphones jack.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR 818 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR 818

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info