Bedienungsanleitung Onkyo TX-NR1007 (Seite 152 von 156) (Englisch)

553760

152

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

152

Troubleshooting—Continued

The following settings can be made for the S-

Video, composite video and COMPONENT

VIDEO inputs

You must use the buttons on the AV receiver to make

these settings.

1. While holding down the input selector button for the

input source that you want to set, press the [SETUP]

button.

2. Use the Left and Right [e]/[r] buttons to change

the setting.

3. Press the input selector button for the input source

that you want to set when you’ve finished.

• Video Attenuation

This setting can be made for the DVD/BD, VCR/

DVR, CBL/SAT, GAME, AUX, or COMPONENT

VIDEO input. (You need to assign the input source

for COMPONENT VIDEO input.)

If you have a games console connected to the

S-Video, composite and component video input, and

the picture isn’t very clear, you can attenuate the

gain.

Video ATT:OFF: (default).

Video ATT:ON: Gain is reduced by 2 dB.

The AV receiver can upconvert component video, S-

Video, and composite video sources for display on a TV

connected to the HDMI outputs. However, if the picture

quality of the source is poor, upconversion may make the

picture worse or disappear altogether.

In this case, try the following:

1 If the video source is connected to a component

video input, connect your TV to the

COMPONENT VIDEO MONITOR OUT.

If the video source is connected to an S-Video input,

connect your TV to a MONITOR OUT S.

If the video source is connected to a composite video

input, connect your TV to the MONITOR OUT V.

2 On the main menu, select “1. Input/Output

Assign”, and then select “2. HDMI Input”.

Select the relevant input selector, and assign it to

“- - - - -” (page 49).

3 On the main menu, select “1. Input/Output

Assign”, and then select “3. Component Video

Input” (page 50):

If the video source is connected to COMPONENT

VIDEO IN1, select the relevant input selector, and

assign it to “IN1”.

If the video source is connected to COMPONENT

VIDEO IN2, select the relevant input selector, and

assign it to “IN2”.

If the video source is connected to COMPONENT

VIDEO IN3, select the relevant input selector, and

assign it to “IN3”.

If the video source is connected to an S-Video input

or composite video input, select the relevant input

selector, and assign it to “- - - - -”.

If “Monitor Out” setting is set to “Analog”, press [VCR/

DVR] and [RETURN] buttons on the AV receiver at the

same time. Select “Skip” in the “VideoProcessor” setting

on the display. To reset back to the original setting, press

the same button at the same time. If you select “Use”, the

AV receiver will output video signals from the video pro-

cessor.

The AV receiver contains a microcomputer for signal pro-

cessing and control functions. In very rare situations,

severe interference, noise from an external source, or

static electricity may cause it to lockup. In the unlikely

event that this happens, unplug the power cord from the

wall outlet, wait at least five seconds, and then plug it

back in again.

Onkyo is not responsible for damages (such as CD

rental fees) due to unsuccessful recordings caused by

the unit’s malfunction. Before you record important

data, make sure that the material will be recorded cor-

rectly.

Before disconnecting the power cord from the wall out-

let, set the AV receiver to Standby.

Important Note Regarding Video Playback

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR1007 Seite 152

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR1007

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info