Bedienungsanleitung Onkyo TX-NR3008 (Seite 23 von 116) (Englisch)

553767

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Note

TX-NR5008

Connect a turntable (MM) that has built-in a phono preamp to TV/CD IN or connect it to PHONO IN with the phono preamp turned

off. If your turntable (MM) doesn’t have a phono preamp, connect to PHONO IN. If your turntable has a moving coil (MC) type car-

tridge, you’ll need a commercially available MC head amp or MC transformer to connect to PHONO IN. See your turntable’s man-

ual for details.

If your turntable has a ground wire, connect it to the AV receiver’s GND screw. With some turntables, connecting the ground wire

may produce an audible hum. If this happens, disconnect it.

When you connect your personal computer to PC IN and select PC input selector, video of the personal computer is output from

HDMI output. However, because the AV receiver selects the video input in the order of HDMI > component > analog RGB, if you

have assigned HDMI IN to the PC input selector, the AV receiver will output signals from HDMI IN in priority to PC IN.

Before using the multichannel input, you must assign it to an input selector. See “Analog Audio Input” (➔ 50). To select the multi-

channel input, see “Audio Selector” (➔ 68). To adjust the subwoofer sensitivity for the multichannel input, see “Subwoofer Input

Sensitivity” (➔ 50).

• The AV receiver can output audio and video signals from the AUX INPUT jacks to the VCR/DVR OUT jacks.

• With connection D, you can listen and record audio from the external components while you are in Zone 2/3. You can listen and record

audio from the external components in the main room; you can listen to the audio in Zone 2/3 as well.

• With connection C, you can enjoy Dolby Digital and DTS. (To record or listen in Zone 2/3 as well, use C and D.)

■ How to record the video

With the connections described above, you cannot record the video through the AV receiver. To make a connection for

video recording (➔ 38).

With u (Remote Interactive), you can use the following

special functions:

■ Auto Power On

When you start playback on a component connected via

u while the AV receiver is on Standby, the AV

receiver will automatically turn on and select that com-

ponent as the input source.

■ Direct Change

When playback is started on a component connected via

u, the AV receiver automatically selects that compo-

nent as the input source.

■ Remote Control

You can use the AV receiver’s remote controller to con-

trol your other u-capable Onkyo components, point-

ing the remote controller at the AV receiver’s remote

control sensor instead of the component. You must enter

the appropriate remote control code first (➔ 93).

Note

•Use only u cables for u connections. u cables are supplied

with Onkyo players (DVD, CD, etc.).

• Some components have two u jacks. You can connect either

one to the AV receiver. The other jack is for connecting addi-

tional u-capable components.

• Connect only Onkyo components to u jacks. Connecting other

manufacturer’s components may cause a malfunction.

• Some components may not support all u functions. Refer to

the manuals supplied with your other Onkyo components.

• While Zone 2 or Zone 3 is on, the Auto Power On and Direct

Change u functions do not work.

• Do not use u connections if you use HDMI Control (RIHD)

(➔ 65).

Connecting Onkyo u Components

Step 1:

Make sure that each Onkyo component is connected

with an analog audio cable (connection D in the hookup

examples) (➔ 22).

Step 2:

Make the u connection (see illustration below).

Step 3:

If you’re using an RI Dock, or cassette tape deck,

change the Input Display (➔ 31).

TV/CD

BD/DVD

REMOTE

CONTROL

ANALOG

AUDIO OUT

ANALOG

AUDIO OUT

e.g., CD player

e.g., DVD player

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3008 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3008

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info