553767
89
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
89
En
RI Dock
With the RI Dock, you can easily play the music stored on
your Apple iPod through the AV receiver and enjoy great
sound, and watch iPod slideshows and videos on your TV.
In addition, the onscreen display (OSD) allows you to
view, navigate, and select your iPod model’s contents on
your TV, and with the supplied remote controller, you can
control your iPod from the comfort of your sofa. You can
even use the AV receiver’s remote controller to operate
your iPod.
Note
Enter the appropriate remote control code before using the AV
receiver’s remote controller for the first time ( 93).
Connect the RI Dock to the AV receiver with an u cable
( 87).
Set the RI Dock’s RI MODE switch to “HDD” or “HDD/
DOCK”.
Set the AV receiver’s Input Display to “DOCK” ( 31).
System Function
Auto Power On
If you press the remote controller’s 1 while the AV
receiver is on Standby, the AV receiver will automatically
turn on, select your iPod as the input source, and your
iPod will start playback.
Direct Change
If you start iPod playback while listening to another input
source, the AV receiver will automatically switch to the
input to which the ND-S1 and RI Dock is connected.
Using the AV receiver’s Remote Controller
You can use the AV receiver’s remote controller to control
basic iPod functions.
Using Your iPod models Alarm Clock
If you use the Alarm Clock function on your iPod to start
playback, the AV receiver will automatically turn on at the
specified time and select your iPod as the input source.
System Off
When you turn off the AV receiver, the ND-S1, RI Dock
and iPod turn off automatically.
Note
Linked operations do not work with video playback or when the
alarm is set to play a sound.
If you use your iPod with any other accessories, iPod playback
detection may not work.
This function works only in the Standard mode ( 90).
Note
On the 5th generation iPod and iPod nano, the click wheel is
disabled during playback. For ND-S1, use iPod button to start
and stop playback and the remote controller to control other iPod
functions.
By pressing REMOTE MODE that’s been programmed
with the remote control code for your Dock, you can con-
trol your iPod in the Dock.
See “Entering Remote Control Codes” for details on
entering a remote control code ( 93).
See the Dock’s instruction manual for more information.
UP-A1 Dock
PORT is preprogrammed with the remote control code for
controlling a Dock with Universal Port connector.
You can control your iPod when “PORT” is selected as
the input source.
Without the RI Control
You must enter a remote control code 82990 first ( 93).
ND-S1
Select “iPod” using ND-S1’s iPod/PC button.
RI Dock
Set the RI Dock’s RI MODE switch to “HDD” or “HDD/
DOCK”.
ON/STANDBY may not work with a remote control
code (without u). In this case, make an u connection
and enter a remote control code 81993 (with u).
With the RI Control
In this case, make an u connection and enter a remote
control code 81993 (with u).
Set the AV receiver’s Input Display to “DOCK” ( 31).
Operating Notes
Use the AV receiver’s volume control to adjust the playback
volume.
While your iPod is inserted in the ND-S1 or RI Dock, its vol-
ume control has no effect. If you adjust your iPod models vol-
ume control while it’s in the UP-A1 Dock, make sure it’s not
set too high before you reconnect your headphones.
Controlling Your iPod
89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Onkyo TX-NR3008 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Onkyo TX-NR3008

Onkyo TX-NR3008 Bedienungsanleitung - Deutsch - 228 seiten

Onkyo TX-NR3008 Bedienungsanleitung - Holländisch - 228 seiten

Onkyo TX-NR3008 Bedienungsanleitung - Französisch - 232 seiten

Onkyo TX-NR3008 Bedienungsanleitung - Italienisch - 228 seiten

Onkyo TX-NR3008 Bedienungsanleitung - Spanisch - 232 seiten

Onkyo TX-NR3008 Bedienungsanleitung - Schwedisch - 228 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info