Bedienungsanleitung Onkyo TX-NR3010 (Seite 56 von 168) (Englisch)

492661

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

Turning On & Basic Operations

En-56

By using ACTIVITIES in Easy macro mode, you can

sequentially operate Onkyo components via simple

commands from a single-button press.

These commands are user-definable. See “Using Normal

Macros” (➔ page 100).

■ MY MOVIE

First, the TV, the Onkyo

Blu-ray Disc player, and the AV

receiver are turned on. The input selector is set to

“BD/DVD”. Finally the player starts playback.

Depending on the start-up time of your Blu-ray Disc/DVD

player, the AV receiver may not activate this playback

command. In this case, press 1 on the remote controller.

■ MY TV

First, the TV, the cable set-top box, and the AV receiver

are turned on. Then the input selector is set to

“CBL/SAT”.

■ MY MUSIC

The Onkyo CD player and the AV receiver are turned on.

The input selector is set to “TV/CD”. Finally, the player

starts playback.

Note

• While the Easy Macro command is being processed, you cannot

use other ACTIVITIES. If you want to operate other components,

first press ALL OFF and use the desired ACTIVITIES.

Turning Off the Components

This button turns off all components activated by the Easy

Macro mode.

First, the related components stop and turn off. Second, the

AV receiver turns off. Finally, the TV turns off (or enters

standby mode).

*1*2

This step doesn’t apply to MY MUSIC, with the default

settings.

With some televisions, the power may not be turned off (or

enter standby mode).

Changing the Source Components

You can change the source components activated by the

Easy Macro mode.

Examples:

If you wished to use MY MUSIC to start the Onkyo

cassette recorder, you would press and hold down

MY MUSIC (about 3 seconds) while holding down TV/CD

until it flashes twice.

Restoring Default

You can restore ACTIVITIES to the default settings.

Using Headphones

Connect a pair of stereo headphones with a

standard plug (1/4 inch or 6.3 mm) to the PHONES

jack.

While the headphones plug is inserted in the PHONES

jack, = indicator, speaker/channel indicator FL and

FR lights.

Note

• Always turn down the volume before connecting your

headphones.

• While the headphones plug is inserted in the PHONES

jack, the speakers are turned off. (The Powered Zone 2/3

speakers are not turned off.)

• When you connect a pair of headphones, the listening mode

is set to Stereo, unless it’s already set to Stereo, Mono,

Direct, or Pure Audio.

• If you connect an iPod or iPhone to the USB port on the AV

receiver, no sound will be output from the headphones jack.

Using Easy Macros

Press ACTIVITIES (MY MOVIE, MY TV, or

MY MUSIC) to start the Easy macro command.

The default sequences of actions are described below.

To change the related source component, see

“Changing the Source Components” shown later in

this chapter.

Press ALL OFF.

While holding down REMOTE MODE for the

playback component you wish to assign, press and

hold down the ACTIVITIES to be changed

(MY MOVIE, MY TV, or MY MUSIC) (about 3

seconds).

ACTIVITIES flashes twice, indicating that the change

is complete.

While holding down HOME, press and hold down

ALL OFF until ALL OFF lights (about 3 seconds).

Release HOME and ALL OFF, and press ALL OFF

again.

ALL OFF flashes twice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3010 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info