Bedienungsanleitung Onkyo TX-NR3010 (Seite 59 von 168) (Englisch)

492661

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

Advanced Operations

En-59

Speaker Levels

■ Subwoofer 1

` –15.0dB to 0.0dB

to +12.0dB in 0.5 dB steps.

■ Subwoofer 2

` –15.0dB to 0.0dB to +12.0dB in 0.5 dB steps.

■ Center

` –12.0dB to 0.0dB to +12.0dB in 0.5 dB steps.

You can adjust the volume of each speaker while listening

to an input source.

These temporary adjustments are cancelled when the AV

receiver is set to standby. To save the setting you made

here, go to “Level Calibration” (➔ page 69) before

setting the AV receiver to standby.

Note

• You cannot use these function while the AV receiver is muted.

• These settings cannot be used while a pair of headphones is

connected.

• Speakers that are set to “No” or “None” in “Speaker

Configuration” (➔ page 67) cannot be adjusted.

•When “Sound Program” is enabled, “Subwoofer 1” and

“Subwoofer 2” cannot be used if the “Subwoofer” setting is set

to “No” in “Sound Program Edit” (➔ page 75).

If the “Subwoofer” setting is set to “1ch”, this setting cannot

be selected (➔ page 67).

Dolby Volume

■ Dolby Volume

See “Dolby Volume” of “Audio Adjust” (➔ page 73).

Note

• This setting cannot be used in either of the following cases:

– The Pure Audio or Direct listening mode is selected.

– Speakers B is being used.

– Any of the THX listening modes is selected, with “Loudness

Plus” set to “On” or “Preserve THX Settings” set to “Yes”

(➔ page 70).

• When “Dolby Volume” is set to “On”, the “Dynamic EQ” and

“Dynamic Volume” settings of all input selectors are switched to

“Off”.

• When “Sound Program” is enabled, the setting must be made

with “Sound Program Edit” (➔ page 75).

Audyssey

■ Audyssey

See “Audyssey” in “Source Setup” (➔ page 76).

■ Dynamic EQ

See “Dynamic EQ” in “Source Setup” (➔ page 76).

■ Dynamic Volume

See “Dynamic Volume” in “Source Setup” (➔ page 76).

Note

• These technologies can be used when all the following conditions

are met:

– Room Correction and Speaker Setup is completed. Note that

“Audyssey” requires the “Audyssey MultEQ XT32 Full

Calibration” method.

– Any listening mode other than Direct or Pure Audio is selected.

– A pair of headphones is not connected.

– Speakers B is not being used.

• The setting is stored individually for each input selector.

•“Dynamic EQ” and “Dynamic Volume” cannot be selected

when any of the THX listening modes is selected, with

“Loudness Plus” set to “On” or “Preserve THX Settings” set to

“Yes” (➔ page 70).

• When “Sound Program” is enabled, the setting must be made

with “Sound Program Edit” (➔ page 75).

Late Night

■ Late Night

For Dolby Digital and Dolby Digital Plus sources, the

options are:

` Off

` Low:

Small reduction in dynamic range.

` High:

Large reduction in dynamic range.

For Dolby TrueHD sources, the options are:

` Auto

The Late Night function is set to “On” or “Off”

automatically.

` Off

` On

Turn this setting on to reduce the dynamic range of Dolby

Digital material so that you can still hear quiet parts even

when listening at low volume levels—ideal for watching

movies late at night when you don’t want to disturb

anyone.

Note

• The effect of the Late Night function depends on the material that

you are playing and the intention of the original sound designer,

and with some material there will be little or no effect when you

select the different options.

• The Late Night function can be used only when the input source

is Dolby Digital, Dolby Digital Plus, or Dolby TrueHD.

• The Late Night function is set to “Off” when the AV receiver is

set to standby. For Dolby TrueHD sources, it will be set to

“Auto”.

• With Dolby TrueHD sources, the Late Night function cannot be

used when “TrueHD Loudness Management” is set to “Off”

(➔ page 73).

• The Late Night function cannot be used when “Dolby Volume”

is set to “On”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3010 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info