Bedienungsanleitung Onkyo TX-NR3010 (Seite 76 von 168) (Englisch)

492661

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

Advanced Operations

En-76

Main Menu Source Setup

Items can be set individually for each input selector.

Audyssey

■ Audyssey

` Off

` Movie:

Select this setting for movie material.

The Audyssey indicator will light.

` Music:

Select this setting for music material.

The Audyssey indicator will light.

Note

•When “Audyssey Quick Start” has been used for measurement,

“Audyssey” cannot be selected.

• Audyssey equalizing does not work with DSD sources.

■ Dynamic EQ

` Off

` On:

Audyssey Dynamic EQ

becomes active.

The Dynamic EQ indicator will light.

With Audyssey Dynamic EQ, you can enjoy great sound

even when listening at low volume levels.

Audyssey Dynamic EQ solves the problem of deteriorating

sound quality as volume is decreased by taking into

account human perception and room acoustics. It does so

by selecting the correct frequency response and surround

volume levels moment-by-moment so that the content

sounds the way it was created at any volume level — not

just at reference level.

■ Reference Level

Audyssey Dynamic EQ Reference Level Offset

` 0dB:

This should be selected for movie contents.

` 5dB:

Select this setting for content that has a very wide

dynamic range, such as classical music.

` 10dB:

Select this setting for jazz or other music that has a

wider dynamic range. This setting should also be

selected for TV content as that is usually mixed at

10 dB below film reference.

` 15dB:

Select this setting for pop/rock music or other

program material that is mixed at very high listening

levels and has a compressed dynamic range.

Movies are mixed in rooms calibrated for film reference.

To achieve the same reference level in a home theater

system each speaker level must be adjusted so that

–30 dBFS band-limited (500 Hz to 2000 Hz) pink noise

produces 75 dB sound pressure level at the listening

position. A home theater system automatically calibrated

by Audyssey MultEQ

XT32 will play at reference level

when the master volume control is set to the 0 dB position.

At that level you can hear the mix as the mixers heard it.

Audyssey Dynamic EQ

is referenced to the standard film

mix level. It makes adjustments to maintain the reference

response and surround envelopment when the volume is

turned down from 0 dB. However, film reference level is

not always used in music or other non-film content.

Audyssey Dynamic EQ Reference Level Offset provides

three offsets from the film level reference (5 dB, 10 dB,

and 15 dB) that can be selected when the mix level of the

content is not within the standard.

Note

• If “Dynamic EQ” setting is set to “Off”, this technology cannot

be used.

■ Dynamic Volume

` Off

` Light:

Activates Light Compression Mode.

` Medium:

Activates Medium Compression Mode.

` Heavy:

Activates Heavy Compression Mode. This setting

affects volume the most. It quiets the loud parts, such

as explosions, and boosts the quiet parts so they can

be heard.

Note

• If you want to use Audyssey Dynamic EQ or

Audyssey Dynamic Volume

with THX listening modes, set the

“Loudness Plus” setting to “Off” and set “Preserve THX

Settings” to “No” (➔ page 70).

• If you make Dynamic Volume active, “Dynamic EQ” is set to

“On”. The Dynamic Vol indicator will light.

• When “Dynamic EQ” is set to “Off”, “Dynamic Volume” is

automatically switched to “Off”.

Source Setup

Preparation

Press the input selector buttons to select an input source.

The tone for each speaker is set automatically by

Audyssey MultEQ

XT32 Room Correction and

Speaker Setup. To enable the following settings, you

must first perform the Room Correction and Speaker

Setup (➔ page 42).

• These technologies cannot be used when:

–a pair of headphones is connected, or

–Speakers B is being used, or

–either Pure Audio or Direct listening mode is selected.

1 2 3 4 5

“Setup”

To be continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3010 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info