Bedienungsanleitung Onkyo TX-NR3010 (Seite 92 von 168) (Englisch)

492661

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

En-92

Controlling Other Components

iPod/iPhone Playback

via Onkyo Dock

RI Dock

With the RI Dock, you can easily play the music of your

iPod/iPhone, or watch the slideshows and videos of your

iPod/iPhone on a TV. In addition, the on-screen display

(OSD) allows you to view, navigate, and select your

iPod/iPhone model’s contents on your TV, and with the

supplied remote controller, you can control your

iPod/iPhone from the comfort of your sofa. You can even

use the AV receiver’s remote controller to operate your

iPod/iPhone.

Note

• Enter the appropriate remote control code before using the AV

receiver’s remote controller for the first time (➔ page 96).

• Connect the RI Dock to the AV receiver with an u cable

(➔ page 25).

• Set the RI Dock’s RI MODE switch to “HDD” or

“HDD/DOCK”.

• Set the AV receiver’s Input Display to “DOCK” (➔ page 54).

■ System Function

Auto Power On

If you press the remote controller’s 1 (Playback) while

the AV receiver is on standby, the AV receiver will

automatically turn on, select your iPod/iPhone as the input

source, and your iPod/iPhone will start playback.

Direct Change

If you start iPod/iPhone playback while listening to another

input source, the AV receiver will automatically switch to

the input to which the RI Dock is connected.

System Off

When you turn off the AV receiver, the RI Dock turns off

automatically.

Other Remote Operations

You can use the remote controller that came with the AV

receiver to control other iPod/iPhone functions. The

available functionality depends on the AV receiver.

Note

• If you use your iPod/iPhone with any other accessories,

iPod/iPhone playback detection may not work.

iPod Alarm

If you use the Alarm function on your iPod to start

playback, the AV receiver will turn on at the specified time

and select your iPod as the input source automatically.

Note

• This linked operation won’t work while a video is being played

or when the sound set for the alarm is a built-in sound (Beep).

• This linked operation won’t work with models on which music

files cannot be used to set the alarm sound.

Using the Onkyo Dock

The Dock is sold separately. Models sold are different

depending on the region.

For the latest information on the Onkyo Dock

components, see the Onkyo web site at:

http://www.onkyo.com

Before using the Onkyo Dock components, update

your iPod/iPhone with the latest software, available

from the Apple web site.

For supported iPod/iPhone models, see the instruction

manual of the Onkyo Dock.

Depending on your iPod/iPhone model and generation,

some of the linked operations may not be available.

■ Operating Notes

• Use the AV receiver’s volume control to adjust the playback

volume.

• While your iPod/iPhone is inserted in the RI Dock, its volume

control has no effect.

• If you do adjust the volume control on your iPod/iPhone while

it’s inserted in the RI Dock, be careful that it’s not set too loud

before you reconnect your headphones.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3010 Seite 92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info