Bedienungsanleitung Onkyo TX-NR414 (Seite 35 von 128) (Englisch)

492644

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Turning On & Basic Operations

En-35

The Home menu provides quick access to frequently used

menus.

■ Network Service

` With this selection, you can use various Internet radio

services or play the contents stored in media connected

to your home network (DLNA) (➔ page 23). Note

that this selection will be grayed out for a short while

after the AV receiver is turned on. Please wait until it

becomes operable.

Press ENTER to display the “NET” screen. If you

want to use the Internet radio services, use q/w to

select the desired service. Pressing ENTER again

switches to that selection. If you want to play music

files on a server or to perform remote playback, use

q/w to select “DLNA” and then press ENTER.

■ USB

` With this selection, you can play contents of portable

players (iPod, etc.) and USB storage devices connected

to the AV receiver’s USB port (➔ pages 22, 23).

Note that this selection will be grayed out for a short

while after the AV receiver is turned on. Please wait

until it becomes operable.

Press ENTER to select a drive or browse the contents

of the media connected, followed by q/w to select the

desired folder or track. Pressing ENTER as a track is

selected will start playback.

■ InstaPrevue

` With this selection, you can preview audio/video

streams coming from HDMI inputs previously

assigned to input selectors (except for HDMI IN 6).

Even with multiple components connected through

HDMI, you can easily switch between inputs as their

previews are displayed on a single screen.

Press ENTER to display the main preview (currently

selected HDMI input) and the additional previews

(other HDMI inputs). Use q/w or e/r to select a

preview thumbnail, and pressing ENTER will switch

the AV receiver to that input source.

■ F/W Update

` With this selection, you can update the firmware of the

AV receiver. Note that this selection will be grayed out

for a short while after the AV receiver is turned on.

Please wait until it becomes operable.

Press ENTER to start the procedure (➔ page 64).

■ Setup

` With this selection, you can access the common

settings of the on-screen Setup menu.

Press ENTER to display the Setup menu

(➔ page 41).

Using the Home Menu

The Home menu appears only on a TV that is

connected to the HDMI OUT. If your TV is connected

to other video outputs, use the AV receiver’s display

when changing settings.

Press RECEIVER followed by HOME.

The Home menu will be superimposed on the TV

screen.

Use q/w and ENTER to make the desired selection.

Press HOME to close the menu.

Network Service

USB

InstaPrevue

F/W Update

Setup

Home

You need to connect the AV receiver to your home

network (➔ page 72).

Tip

• If no video signals are present, the thumbnails will be filled in

black.

• You can specify the number of preview thumbnails as well as

their positioning on screen (➔ page 50).

Note

• This function cannot be selected when:

– HDMI IN 6 is the current HDMI input source, or

– No signal is present on the current input source.

Tip

• You can also access frequently used settings from Quick

Setup (➔ page 39).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR414 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR414

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info