Bedienungsanleitung Onkyo TX-NR414 (Seite 59 von 128) (Englisch)

492644

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

En-59

Appendix

Troubleshooting

If you have any trouble using the AV receiver, look for a

solution in this section. If you can’t resolve the issue

yourself, contact your Onkyo dealer.

■ Can’t turn on the AV receiver

■ The AV receiver turns off unexpectedly

■ The AV receiver turns off and after restoring the

power, it turns off again

■ There’s no sound, or it’s very quiet

If you can’t resolve the issue yourself, try resetting the

AV receiver before contacting your Onkyo dealer.

To reset the AV receiver to its factory defaults, turn it

on and, while holding down CBL/SAT, press

8ON/STANDBY. “Clear” will appear on the AV

receiver’s display and the AV receiver will enter

standby mode.

Note that resetting the AV receiver will delete your radio

presets and custom settings.

To reset the remote controller to its factory defaults,

while holding down RECEIVER, press and hold down

HOME until the remote indicator lights (about 3

seconds). Within 30 seconds, press RECEIVER again.

HOME

RECEIVER

Remote indicator

The on-screen menus appear only on a TV that is

connected to the HDMI OUT. If your TV is connected

to other video outputs, use the AV receiver’s display

when changing settings.

Power

Make sure that the power cord is properly plugged

into the wall outlet.

—

Unplug the power cord from the wall outlet, wait five

seconds or more, then plug it in again.

—

The AV receiver will automatically enter standby

mode when Auto Standby has been set and launches.

The protection circuit has been activated. Remove the

power cord from the wall outlet immediately. Make

sure that all speaker cables and input sources are

properly connected, and leave the AV receiver with

its power cord disconnected for 1 hour. After that,

reconnect the power cord and turn the power on. If

the AV receiver turns off again, unplug the power

cord and contact your Onkyo dealer.

Caution: If “CHECK SP WIRE” appears on the AV

receiver’s display, the speaker cables may be

shorting.

WARNING

If smoke, smell or abnormal noise is produced by the AV

receiver, unplug the power cord from the wall outlet

immediately and contact your Onkyo dealer.

Audio

Make sure that the digital input source is selected

properly.

Make sure that all audio connecting plugs are pushed

in all the way.

Make sure that the inputs and outputs of all

components are connected properly.

15-17

Make sure that the polarity of the speaker cables is

correct, and that the bare wires are in contact with the

metal part of each speaker terminal.

Make sure that the input source is properly selected. 20

Make sure that the speaker cables are not shorting. 13

Check the volume. The AV receiver is designed for

home theater enjoyment. It has a wide volume range,

allowing precise adjustment.

—

If the MUTING indicator is flashing on the AV

receiver’s display, press the remote controller’s

MUTING to unmute the AV receiver.

While a pair of headphones is connected to the

PHONES jack, no sound is output from the speakers.

If there’s no sound from a DVD player connected to

an HDMI IN, check the DVD player’s output

settings, and be sure to select a supported audio

format.

—

Check the digital audio output setting on the

connected device. On some game consoles, such as

those that support DVD, the default setting is off.

—

With some DVD-Video discs, you need to select an

audio output format from a menu.

—

If your turntable uses an MC cartridge, you must

connect an MC head amp, or an MC transformer.

—

Make sure that none of the connecting cables are

bent, twisted, or damaged.

—

Not all listening modes use all speakers. 30

Specify the speaker distances and adjust the

individual speaker levels.

If the input signal format is set to “PCM” or “DTS”.

Set it to “Off”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR414 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR414

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info