Bedienungsanleitung Onkyo TX-NR414 (Seite 63 von 128) (Englisch)

492644

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Appendix

En-63

■ Standby power consumption

■ The sound changes when I connect my

headphones

■ The display doesn’t work

■ How do I change the language of a multiplex

source

■ The u functions don’t work

■ The functions System On/Auto Power On and

Direct Change don’t work for components

connected via u

■ The following settings can be made for the

composite video inputs

You must use the buttons on the unit to make these

settings.

On the AV receiver, press the input selector for the input

source that you want to set and the SETUP button

simultaneously. While holding down the input selector

button, press SETUP until “Video ATT :On” appears

on the AV receiver’s display. Then, release both buttons.

To turn the setting off, repeat the above process so that

“Video ATT :Off” appears on the AV receiver’s

display, and release the buttons.

•Video Attenuation

This setting can be made for the BD/DVD, CBL/SAT,

GAME, PC, AUX or USB input.

If you have a game console connected to the composite

video input, and the picture isn’t very clear, you can

attenuate the gain.

Video ATT :Off: (default).

Video ATT :On: Gain is reduced by 2 dB.

■ If the picture on your TV/monitor connected to

the HDMI OUT is unstable, try switching the

DeepColor function off

To turn off the DeepColor function, simultaneously

press the GAME and 8ON/STANDBY buttons on the

AV receiver. While holding down GAME, press

8ON/STANDBY until “Deep Color:Off” appears on

the AV receiver’s display. Then, release both buttons.

To reactivate the DeepColor function, repeat the above

process until “Deep Color:On” appears on the AV

receiver’s display and release the buttons.

Others

In the following cases, the power consumption in

standby mode may reach up to a maximum of 4.2 W:

–The “HDMI Ctrl (RIHD)” setting is set to “On”.

(Depending on the TV status, the AV receiver will

enter standby mode as usual.)

–The “HDMI Through” setting is set to other than

“Off”.

–The “Network Standby” setting is set to “On”.

49, 51

When a pair of headphones is connected, the listening

mode is set to Stereo, unless it’s already set to Stereo,

Mono, Direct, or Pure Audio (European, Australian

and Asian models).

—

The display is turned off when the Pure Audio

(European, Australian and Asian models) listening

mode is selected.

—

Use the “Input Ch (Mux)” setting in the “Audio

Adjust” menu to select “Main” or “Sub”.

To use u, you must make an u connection and an

analog audio connection (RCA) between the

component and AV receiver, even if they are

connected digitally.

While Zone 2 is selected, the u functions don’t

work.

These functions don’t work when Zone 2 is turned

on.

The AV receiver contains a microcomputer for signal

processing and control functions. In very rare situations,

severe interference, noise from an external source, or

static electricity may cause it to lockup. In the unlikely

event that this happens, unplug the power cord from the

wall outlet, wait at least five seconds, and then plug it

back in.

Onkyo is not responsible for damages (such as CD rental

fees) due to unsuccessful recordings caused by the unit’s

malfunction. Before you record important data, make

sure that the material will be recorded correctly.

Before disconnecting the power cord from the wall

outlet, set the AV receiver to standby.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR414 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR414

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info