Bedienungsanleitung Onkyo TX-NR5007 (Seite 31 von 164) (Englisch)

553765

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

Connecting the AV receiver—Continued

Making HDMI Connections

■ Video Signals

Digital video signals received by the HDMI IN jacks are normally output by the HDMI MAIN OUT and SUB OUT for

display on your TV. Composite video, S-Video, and component video sources can be upconverted for the HDMI output.

See “Video Connection Formats” on page 32 for more information.

■ Audio Signals

Digital audio signals received by the HDMI IN jacks are output by the speakers and headphones connected to the AV

receiver. Normally, they are not output by the HDMI outputs, unless the “Audio TV Out” setting is set to “On” (see

page 113).

To listen to audio received by the HDMI IN jacks through your TV’s speakers:

•Set the “TV Control” setting to “On” (see page 114) for an -compatible TV.

•Set the “Audio TV Out” setting to “On” (see page 113) when the TV is not compatible with

or the “TV Control” setting to “Off”.

•Set your DVD/BD player’s HDMI audio output setting to PCM.

Notes:

• The HDMI video stream is compatible with DVI (Digital Visual Interface), so TVs and displays with a DVI input can

be connected by using an HDMI-to-DVI adapter cable. (Note that DVI connections only carry video, so you’ll need

to make a separate connection for audio.) However, reliable operation with such an adapter is not guaranteed. In

addition, video signals from a PC are not guaranteed.

• When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be

seen on the TV screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV

power is off or the TV is set to another input source, this may result in no sound from the AV receiver or the sound

may be cut off.

• When the “Audio TV Out” setting is set to “On” (see page 113) to hear from your TV’s speakers, by controlling the

AV receiver’s volume, the sound will be output from the AV receiver’s speakers, too. When the

“TV Control” setting

is set to

“On” to hear from speakers of -compatible TV, by controlling the AV receiver’s volume, the AV

receiver’s speakers will produce sound while the TV’s speakers are muted. To stop the AV receiver’s speakers pro-

ducing sound, change the settings, change your TV’s settings, or turn down the AV receiver’s volume.

• The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the

picture is poor or there’s no sound from a component connected via HDMI, check its setup. Refer to the connected

component’s instruction manual for details.

Step 1:

Use HDMI cables to connect the AV receiver’s HDMI jacks to your HDMI-compatible DVD/BD player, TV, projec-

tor, and so on.

Step 2:

Assign each HDMI IN to an input selector in the HDMI Input Setup (see page 54).

Hint!

HDMI

OUT

DVD/BD player

HD camcorder, etc

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR5007 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR5007

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info