Bedienungsanleitung Onkyo TX-NR5007 (Seite 33 von 164) (Englisch)

553765

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

Connecting the AV receiver—Continued

■ “Monitor Out” Setting Set to “Both”, “Both(Main)” or “Both(Sub)”

With the “Monitor Out” setting set to “Both”,

“Both(Main)” or “Both(Sub)” (see page 52),

video input signals flow through the AV receiver

as shown, with composite video, S-Video, and

component video sources all being upconverted

for both HDMI outputs. Use the “Both”,

“Both(Main)” or “Both(Sub)” setting if you

connect the AV receiver’s HDMI OUT MAIN

and HDMI OUT SUB to your TVs.

The composite video, S-Video, and component

video outputs pass through their respective input

signals as they are.

Both: Video signals are output from both HDMI

outputs at the resolution supported by both TVs.

You cannot select “Resolution” setting. The pic-

ture adjust setting will be that for “HDMI Main”.

Both (Main): Video signals are output from both

HDMI outputs but HDMI OUT MAIN will

become a priority; depending on the resolution, video signals may not be output from HDMI OUT SUB.

Both (Sub): Video signals are output from both HDMI outputs but HDMI OUT SUB will become a priority; depending

on the resolution, video signals may not be output from HDMI OUT MAIN.

Note:

The “Monitor Out” setting will be automatically switched to “Analog” (see page 52) if not connected to both outputs

when “Both” is selected or if not connected to a priority output when “Both(Main)” or “Both(Sub)” is selected.

■ “Monitor Out” Setting Set to “Analog”

With the “Monitor Out” setting set to “Analog”

(see page 52), video input signals flow through

the AV receiver as shown, with composite video

and S-Video sources being upconverted for the

component video output. Use this setting if you

connect the AV receiver’s COMPONENT

VIDEO MONITOR OUT to your TV.

Composite video is upconverted to S-Video and

S-Video is downconverted to composite video.

Note that these conversions only apply to the

MONITOR OUT V and S outputs, not the

VCR/DVR OUT V and S outputs.

The composite video, S-Video, and component

video outputs pass through their respective input

signals as they are.

This signal flow also applies when the “Resolu-

tion” setting is set to “Through” (see page 52).

Video Signal Flow and the Resolution Setting

When the “Monitor Out” setting is set to “Ana-

log” (see page 52), if the “Resolution” setting is

set to anything other than “Through” (see

page 52), the video signal flow will be as shown

here, with composite video and S-Video sources

being upconverted for the component video out-

put.

The composite video, S-Video, and component

video outputs pass through their respective ana-

log input signals as they are. HDMI input signals

are not output.

MONITOR OUT

DVD/BD player, etc.

AV receiver

TV, projector, etc.

Composite

S-Video

Component

Video Signal Flow Chart

HDMI

MONITOR OUT

DVD/BD player, etc.

AV receiver

TV, projector, etc.

Composite

S-Video

Component

Video Signal Flow Chart

HDMI

MONITOR OUT

DVD/BD player, etc.

AV receiver

TV, projector, etc.

Composite

S-Video

Component

Video Signal Flow Chart

HDMI

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR5007 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR5007

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info