Bedienungsanleitung Onkyo TX-NR5008 (Seite 14 von 116) (Englisch)

553766

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Speaker Configuration

The following table indicates the channels you should use

depending on the number of speakers that you have.

For 9.2-channel surround-sound playback, you need 9

speakers and 2 powered subwoofers.

If you’re using only one surround back speaker, connect it to

the SURR BACK/ZONE 3 L terminal.

No matter how many speakers you use, 2 powered sub-

woofers are recommended for a really powerful and solid

bass.

To get the best from your surround sound system, you

need to set the speaker settings. You can do this automati-

cally (➔ 32) or manually (➔ 50).

Attaching the Speaker Cable Labels

The AV receiver’s positive (+) speaker terminals are all

red (the negative (–) speaker terminals are all black).

The supplied speaker cable labels are also color-coded and

you should attach them to the positive (+) side of each

speaker cable in accordance with the table above. Then all

you need to do is to match the color of each label to the

corresponding speaker terminal.

Speaker Connection Precautions

Read the following before connecting your speakers:

• You can connect speakers with an impedance of between

4 and 16 ohms. If the impedance of any of the connected

speakers is 4 ohms or more, but less than 6 ohms, be sure

to set the minimum speaker impedance to “4ohms”

(➔ 51). If you use speakers with a lower impedance, and

use the amplifier at high volume levels for a long period

of time, the built-in protection circuit may be activated.

• Disconnect the power cord from the wall outlet before

making any connections.

• Read the instructions supplied with your speakers.

• Pay close attention to speaker wiring polarity. In other

words, connect positive (+) terminals only to positive (+)

terminals, and negative (–) terminals only to negative (–)

terminals. If you get them the wrong way around, the

sound will be out of phase and will sound unnatural.

• Unnecessarily long, or very thin speaker cables may

affect the sound quality and should be avoided.

• If you use 4 or 5 speakers, connect each of the two sur-

round speakers to the SURR L/R terminals. Do not con-

nect them to the SURR BACK/ZONE 3 L/R, FRONT

WIDE/ZONE 2 L/R, or FRONT HIGH L/R terminals.

• Be careful not to short the positive and negative wires.

Doing so may damage the AV receiver.

• Make sure the metal core of the wire does not have con-

tact with the AV receiver’s rear panel. Doing so may

damage the AV receiver.

• Don’t connect more than one cable to each speaker ter-

minal. Doing so may damage the AV receiver.

• Don’t connect one speaker to several terminals.

Number of

speakers

23456777889991011

Front speakers ✔✔✔✔✔✔✔✔✔✔✔✔✔✔ ✔

Center

speaker

✔ ✔✔✔✔✔✔✔✔✔✔✔ ✔

Surround

speakers

✔✔✔✔✔✔✔✔✔✔✔✔ ✔

Surround back

speaker

✔✔✔✔

Surround back

speakers

✔✔✔✔

Front high

speakers

✔✔✔✔✔✔

Front wide

speakers

✔ ✔ ✔✔✔ ✔

Speaker Color

Front left, Front high left, Front wide left,

Zone 2 left

White

Front right, Front high right, Front wide right,

Zone 2 right

Red

Center Green

Surround left Blue

Surround right Gray

Surround back left, Zone 3 left Brown

Surround back right, Zone 3 right Tan

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR5008 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR5008

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info