Bedienungsanleitung Onkyo TX-NR5008 (Seite 98 von 116) (Englisch)

553766

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Note

• The remote controller can learn approximately 70 to 90 com-

mands, although this will be less if commands that use a lot of

memory are learned.

• Remote controller buttons such as Play, Stop, Pause, and so on

are preprogrammed with commands for controlling Onkyo CD

players, cassette decks, and DVD players. However, they can

learn new commands, and you can restore the preprogrammed

commands at any time by resetting the remote controller (➔ 94).

• To overwrite a previously learned command, repeat this proce-

dure.

• Depending on the remote controller that you are using, there may

be some buttons that won’t work as expected, or even some

remotes that cannot be learned at all.

• Only commands from infrared remote controllers can be learned.

• When the remote controller’s batteries expire, all learned com-

mands will be lost and will have to be learned all over again, so

don’t discard your other remote controllers.

■ Deleting Learning Commands

1. While holding down REMOTE MODE for the mode

in which you want to delete the command, press and

hold down TV 9 until REMOTE MODE button

lights (about 3 seconds).

2. Press REMOTE MODE or the button from which you

want to delete the commands.

REMOTE MODE button flashes twice.

When you press REMOTE MODE, all commands

learned in that remote mode will be deleted.

You can program the remote controller’s ACTIVITIES to

perform a sequence of remote control actions.

Example:

To play a CD you typically need to perform the following

actions:

1. Press RECEIVER to select the Receiver remote con-

troller mode.

2. Press ON to turn on the AV receiver.

3. Press TV/CD to select the TV/CD input source.

4. Press 1 to start playback on the CD player.

You can program ACTIVITIES so that all four actions are

performed with just one button press.

Making Macros

Each ACTIVITIES can store one macro, and each macro

can contain up to 32 commands.

Running Macros

Deleting Macros

Using Normal Macros

RECEIVER

MY MOVIE,

MY TV,

MY MUSIC

ALL OFF

While holding down RECEIVER, press and hold

down MY MOVIE, MY TV, or MY MUSIC until

MY MOVIE, MY TV, or MY MUSIC lights (about

3 seconds).

Press the buttons whose actions you want to pro-

gram into the macro in the order you want them

performed.

For the CD example above, you’d press the following

buttons: ON, TV/CD, 1.

Note

• MODE is invalid at macro making operation.

When you’ve finished, press ACTIVITIES again.

ACTIVITIES button flashes twice.

If you enter 32 commands, the process will finish

automatically.

Note

• Once you have taught a new macro commands, the origi-

nal macro will no longer work. If you retrieve it, you will

have to taught again.

Press MY MOVIE, MY TV, or MY MUSIC.

The commands in the macro are transmitted in the

order in which they were programmed. Keep the

remote controller pointed at the AV receiver until all

of the commands have been transmitted.

Macros can be run at any time, regardless of the cur-

rent remote controller mode.

While holding down HOME, press and hold down

ALL OFF until ALL OFF lights (about 3 seconds).

Press ALL OFF again.

ALL OFF flashes twice.

Note

• You can use Easy macro when the macro is deleted

(➔ 31).

• When you use Normal macro, you cannot use the easy

macro command including the change of the source com-

ponent.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR5008 Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR5008

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info