Bedienungsanleitung Onkyo TX-NR535 (Seite 13 von 20) (Englisch)

548134

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Step 3:

Playing Back

Bass, Treble: Adjust volume of the front speaker.

• It cannot be set if the listening mode is Pure Audio

(European, Australian and Asian models) or Direct.

PM Bass (Phase Matching Bass): Suppress phase

shift in the midrange to enhance bass sound. Thus

smooth and powerful bass sound can be obtained.

• It cannot be set if the listening mode is Pure Audio

(European, Australian and Asian models) or Direct.

Subwoofer Level, Center Level: Adjust the speaker

level while listening to the sound. The adjustment you

made will be reset to the previous status when you turn

the unit to standby mode.

• The speakers cannot be adjusted if they have been

set to "No" or "None" in "Sp Config".

AccuEQ: Disables the sound field correction settings

set in the automatic speaker setting. The setting can be

separately set to each input.

• The setting cannot be selected if the automatic

speaker setting has not been performed.

• It cannot be set if headphones are connected or the

listening mode is Pure Audio (European, Australian

and Asian models) or Direct.

Late Night: Make small sounds to be easily heard. It

is useful when you need to reduce the volume while

watching a movie late night. You can enjoy the effect

on Dolby Digital, Dolby Digital Plus and Dolby TrueHD

sources only.

• Turning the unit to standby mode will set the setting

to "Off". In case of Dolby TrueHD, the setting will be

set to "Auto".

Music Optimizer : Improve the quality of the

compressed audio. Playback sound of lossy

compressed files such as MP3 will be improved. The

setting can be separately set to each input.

• The setting is effective in the signals of 48 kHz or

less. The setting is not effective in the bitstream

signals.

• It cannot be set if the listening mode is Pure Audio

(European, Australian and Asian models) or Direct.

Cinema Filter: Adjust the soundtrack that was

processed to enhance its high pitch range, in order to

make it suitable for home theater.

•

This function can be used in the following listening

modes: Multichannel, Dolby Digital, Dolby Digital Plus,

Dolby TrueHD, DTS, DTS-HD High Resolution Audio,

DTS-HD Master Audio, DTS Express, DTS 96/24,

Dolby PL II Movie, and Neo:6 Cinema.



Information: Display the audio information.



Listening Mode: Select the listening mode from the

categories of "MOVIE/TV", "MUSIC" and "GAME".

•

It cannot be set when audio is played from the TV's speakers.

Using the ZONE function

You can connect the unit with a pre-main amplifier in

a separate room and play the sound from the device

connected to the unit via analog connection or from the

"NET", "USB" or "BLUETOOTH" source. It is also possible

to play the sound from different analog connected devices

in the main room and separate room.

•

As for the "NET", "USB" and "BLUETOOTH", you cannot select

different inputs for the main room and separate room. For

example, if "NET" has been selected in the main room and then

"USB" is selected on the pre-main amplifier in the separate room,

the input in the main room will change to "USB" accordingly.

•

When listening to AM/FM broadcasting, you cannot select

different stations for the main room and separate room. Therefore

broadcasting of the same station will be heard in the both rooms.

Making ZONE connection

Connect the ZONE 2 LINE OUT jacks of the unit and the

line-in jacks of the pre-main amplifier in a separate room

with an analog audio (RCA) cable.

Performing ZONE playback

Press ZONE2 on the remote controller, point the

remote controller at the remote controller sensor

and press

RECEIVER.

"Z2" lights on the unit and the ZONE function is enabled.

(ZONE 2 is now on.)

Press ZONE2 on the remote controller again and

press INPUT SELECTOR of the input to be played in

a separate room.

To play the same source in the main room and separate

room, hold down ZONE2 for approximately 3 seconds.

The volume should be adjusted with the pre-main

amplifier used in the separate room.



To control ZONE playback on the main unit, press ZONE2 and within 8

seconds, press the input selector button of the input to be played in a

separate room. To play the same source in the main room and separate

room, press ZONE2 twice. "Z2 : Source" appears on the unit's display.

To turn off the ZONE function: Press ZONE2 on the

remote controller and press

RECEIVER. Alternatively

press OFF on the main unit.

•

If ZONE 2 is on, power consumption during standby

becomes larger than normal.

•

If ZONE 2 is turned on when the listening mode of the

main room is Pure Audio, it will automatically switch to

Direct. (European, Australian and Asian models)

•

While ZONE 2 is on, the RI linked system function

(interlink between Onkyo components) is disabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR535 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR535

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info