Bedienungsanleitung Onkyo TX-NR579 (Seite 42 von 84) (Englisch)

462088

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Component Video Input

If you connect a video component to a component video

input, you must assign that input to an input selector. For

example, if you connect your Blu-ray Disc/DVD player to

COMPONENT VIDEO IN 2, you must assign “IN2” to

the “BD/DVD” input selector.

Here are the default assignments.

■ BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,

TV/CD, PORT

` IN1, IN2:

Select a corresponding component video input to

which the video component has been connected.

` -----:

Select if you are using the HDMI output, not the

component video output, to output composite video

and component video sources.

Note

• If you connect a component (such as UP-A1 Dock with docked

iPod/iPhone) to the UNIVERSAL PORT jack, you cannot

assign any input to the “PORT” selector.

•The “TUNER” selector cannot be assigned and is fixed at the

“-----” option.

Digital Audio Input

If you connect a component to a digital audio input, you

must assign that input to an input selector. For example, if

you connect your CD player to the OPTICAL IN 1, you

must assign “OPTICAL1” to the “TV/CD” input

selector.

Here are the default assignments.

■ BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,

TV/CD, PORT

` COAXIAL1, COAXIAL2, OPTICAL1,

OPTICAL2:

Select a corresponding digital audio input to which

the component has been connected.

` -----:

Select if the component is connected to an analog

audio input.

Note

•When an HDMI IN is assigned to an input selector in “HDMI

Input” (➔ page 41), the same HDMI IN will be set as a priority

in this assignment. In this case, if you want to use the coaxial or

optical audio input, make the selection in the “Audio Selector”

(➔ page 50).

• Available sampling rates for PCM signals from a digital input

(optical and coaxial) are 32/44.1/48/88.2/96 kHz/16, 20, 24 bit.

• If you connect a component (such as UP-A1 Dock with docked

iPod/iPhone) to the UNIVERSAL PORT jack, you cannot

assign any input to the “PORT” selector.

•The “TUNER” selector cannot be assigned and is fixed at the

“-----” option.

Main menu Speaker Setup

Here you can check the settings made by Audyssey 2EQ

Room Correction and Speaker Setup function, or set them

manually, which is useful if you change one of the

connected speakers after using Audyssey 2EQ Room

Correction and Speaker Setup function.

Note

• These settings are not available in either of the following cases:

– a pair of headphones is connected.

–the “Audio TV Out” setting is set to “On” (➔ page 53).

–“HDMI Control (RIHD)” is set to “On” (➔ page 52) and

you’re listening through your TV speakers.

Input selector Default assignment

BD/DVD IN1

VCR/DVR - - - - -

CBL/SAT IN2

GAME -----

AUX -----

TV/CD -----

PORT -----

Input selector Default assignment

BD/DVD COAXIAL1

VCR/DVR - - - - -

CBL/SAT COAXIAL2

GAME OPTICAL1

AUX -----

TV/CD OPTICAL2

PORT -----

Speaker Setup

Some of the settings in this section are set automatically

by Audyssey 2EQ

Room Correction and Speaker

Setup (➔ page 29).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR579 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR579

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info