Bedienungsanleitung Onkyo TX-NR579 (Seite 50 von 84) (Englisch)

462088

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

■ Color Temperature

*2*4

` Warm

` Normal

` Cool

With this setting you can adjust the color temperature.

Note

•“Picture Adjust” cannot be used with the NET input selector.

This procedure can also be performed on the remote controller

by using the Home menu (➔ page 37).

When the “Picture Mode” setting is set to anything other than

“Custom”, this setting cannot be used.

If the “Resolution” setting is set to “4K Upscaling”

(➔ page 41), this setting is fixed at “Off”.

Press CLR if you want to reset to the default value.

If the “Game Mode” setting is set to “On”, this setting is

fixed at “Off”.

When a 3D video source is input, “Wide Mode” is fixed to

“Full”.

Audio Selector

You can set priorities of audio output when there are both

digital and analog inputs.

■ Audio Selector

` ARC:

The audio signal from your TV tuner can be sent to

the HDMI OUT of the AV receiver.

With this selection, the TV’s audio can be

automatically selected as a priority among other

assignments.

` HDMI:

This can be selected when HDMI IN has been

assigned as an input source. If both HDMI (HDMI

IN) and digital audio inputs (COAXIAL IN or

OPTICAL IN) have been assigned, HDMI input is

automatically selected as a priority.

` COAXIAL:

This can be selected when COAXIAL IN has been

assigned as an input source. If both coaxial and

HDMI inputs have been assigned, coaxial input is

automatically selected as a priority.

` OPTICAL:

This can be selected when OPTICAL IN has been

assigned as an input source. If both optical and

HDMI inputs have been assigned, optical input is

automatically selected as a priority.

` Analog:

The AV receiver always outputs analog signals.

Note

• The setting is stored individually for each input selector.

• This setting can be made only for the input source that is

assigned as HDMI IN, COAXIAL IN, or OPTICAL IN.

•The “Audio Selector” settings cannot be used with the NET,

USB and PORT (with connected component) input selectors.

You can select “ARC” if you select the TV/CD input selector.

But you cannot if you’ve selected “Off” in the “Audio

Return Channel” setting (➔ page 53).

■ Fixed Mode

` Off

The format is detected automatically. If no digital

input signal is present, the corresponding analog

input is used instead.

` PCM:

Only 2-channel PCM format input signals will be

heard. If the input signal is not PCM, the PCM

indicator will flash and noise may also be produced.

` DTS:

Only DTS (but not DTS-HD) format input signals

will be heard. If the input signal is not DTS, the DTS

indicator will flash and there will be no sound.

When “HDMI”, “COAXIAL” or “OPTICAL” is

selected in the “Audio Selector” setting, you can then

specify the signal type in “Fixed Mode”.

Normally, the AV receiver detects the signal format

automatically. However, if you experience either of the

following issues when playing PCM or DTS material, you

can manually set the signal format to PCM or DTS.

• If the beginnings of tracks from a PCM source are cut

off, try setting the format to PCM.

• If noise is produced when fast forwarding or reversing a

DTS CD, try setting the format to DTS.

Note

• The setting is stored individually for each input selector.

• The setting will be reset to “Off” when you change the setting in

“Audio Selector” (➔ page 50).

Charge Mode

■ Charge Mode

` Auto

Power feeding is interrupted when your iPod/iPhone

is fully charged.

` On:

Power feeding continues even if your iPod/iPhone is

fully charged.

` Off:

Your iPod/iPhone is not charged.

You can specify how the power is fed to your iPod/iPhone

when the AV receiver is in standby mode.

Note

• This setting cannot be selected when:

– the UP-A1 Dock with docked iPod/iPhone is not connected to

the AV receiver, or

– the docked iPod/iPhone model is not supported.

•When the “Charge Mode” setting is set to “On”, or to “Auto”

with your iPod/iPhone recharging, the SLEEP indicator is dimly

lit in standby mode. In such conditions, the power consumption

of the AV receiver slightly increases.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR579 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR579

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info