Bedienungsanleitung Onkyo TX-NR579 (Seite 53 von 84) (Englisch)

462088

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

■ HDMI Through

` Off

` Auto:

Detects the signal and automatically selects the input

source.

` BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,

TV/CD, PORT:

Selects the input source for which the HDMI

Through function is enabled.

` Last:

The HDMI Through function is activated on the

input source selected at the time of setting the AV

receiver to standby mode.

When enabling the HDMI Through function, regardless of

whether the AV receiver is on or in standby, both audio

and video streams from an HDMI input will be output to

the TV or other components via HDMI connection. The

HDMI THRU and HDMI indicators light when enabled

(HDMI is dimly-lit).

This setting is set to “Auto” automatically when the above

“HDMI Control (RIHD)” is set to “On”.

Note

• Only the input source assigned to the HDMI IN via “HDMI

Input” is enabled (➔ page 41).

• The power consumption during standby mode will increase

during the HDMI Through function; however in the following

cases, the power consumption can be saved:

– The TV is in standby mode.

– You are watching a TV program.

• Refer to the connected component’s instruction manual for

details.

• Depending on the connected component, the correct input source

may not be selected with the setting set to “Auto”.

• This setting is set to “Off” automatically when the “HDMI

Control (RIHD)” setting is set to “Off”.

■ Audio TV Out

` Off

` On

This preference determines whether the incoming audio

signal is output from the HDMI output. You may want to

turn this preference on if your TV is connected to the

HDMI output and you want to listen to the audio from a

connected component through your TV’s speakers.

Normally, this should be set to “Off”.

Note

•If “On” is selected and the audio can be output from the TV, the

AV receiver will output no sound through its speakers. In this

case, “TV Speaker” appears on the display by pressing

DISPLAY.

•When

“HDMI Control (RIHD)” is set to “On”, this setting is

fixed to

“Auto”.

• With some TVs and input signals, no sound may be output even

when this setting is set to

“On”.

•When “Audio TV Out” or

“HDMI Control (RIHD)” is set to

“On” and you’re listening through your TV’s speakers

(➔ page 15), turning up the AV receiver’s volume control will

make the sound be output from the AV receiver’s front left and

right speakers. To stop the AV receiver’s speakers producing

sound, change the settings, change your TV’s settings, or turn

down the AV receiver’s volume.

■ Audio Return Channel

` Off

` Auto

The audio signal from your TV tuner can be sent to

the HDMI OUT of the AV receiver.

The audio return channel (ARC) function allows an ARC

capable TV to send the audio stream to the HDMI OUT of

the AV receiver. To use this function, you must select the

TV/CD input selector and your TV must be ARC capable.

Note

• If you set “Audio Return Channel” to “Auto”, the “Audio

Selector” settings of the TV/CD input selector will be

automatically switched to “ARC” (➔ page 50).

•The “Audio Return Channel” setting can be set only when the

“HDMI Control (RIHD)” setting is set to “On”.

• This setting is set to “Auto” automatically when the “HDMI

Control (RIHD)” is set to “On” for the first time.

■ Lip Sync

` Off

` On

This function allows the AV receiver to automatically

correct any delay between the video and the audio, based

on the data from the connected monitor.

Note

• This function works only if your HDMI-compatible TV supports

HDMI Lip Sync.

Auto Standby

■ Auto Standby

` Off

` On

When “Auto Standby” is set to “On”, the AV receiver

will automatically enter standby mode if there is no

operation for 30 minutes with no audio and no video

signal input.

“Auto Standby” will appear on the display and OSD 30

seconds before the Auto Standby comes on.

Note

•Set to “

On”, the Auto Standby function may activate itself

during playback with some sources.

•The Auto

Standby function does not work when Zone 2 is on.

After changing the settings of the “HDMI Control

(RIHD)”, “HDMI Through” or “Audio Return

Channel”

turn off the power on all connected pieces of

equipment and then turn them on again. Refer to the

user’s manuals for all connected pieces of equipment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR579 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR579

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info