Bedienungsanleitung Onkyo TX-NR579 (Seite 58 von 84) (Englisch)

462088

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

■ Operating on the AV receiver

■ Operating on the remote controller

To control Zone 2, you must press ZONE2 on the remote

controller first.

Adjusting the Volume for Zone 2

■ Operating on the remote controller

■ Operating on the AV receiver

If your Zone 2 speakers are connected to a receiver or

integrated amp in Zone 2, use its volume control to adjust

the volume.

Muting Zone 2

■ Operating on the remote controller

Tip

• To unmute, press ZONE2 followed by MUTING again.

Note

• Only analog input sources are output from the ZONE 2 LINE

OUT L/R jacks and ZONE 2 L/R terminals. Digital input

sources are not output. If no sound is heard when an input source

is selected, verify that the source is connected to an analog input.

• While Zone 2 is on, u functions will not work.

• You cannot select different AM or FM radio stations for your

main room and Zone 2. The same AM/FM radio station will be

heard in each room. Namely, if you have selected an FM station

for the main room, that station will also be output in Zone 2.

• When you have selected NET or USB as the input selector, the

last selector selected will be set for both Main room and Zone 2.

• Zone 2 can also be unmuted by adjusting the volume.

• When Zone 2 is activated and its input selector is selected, the

power consumption of standby mode slightly increases.

• When setting the AV receiver to standby mode while Zone 2 is

active, the Z2 indicator is dimly lit.

• Activating Zone 2 in the main room when the listening mode is

set to Pure Audio will automatically switch it to Direct.

Controlling Zone 2 Components

To turn on Zone 2 and select an input source, press

ZONE 2 followed by an input selector button

within 8 seconds.

Zone 2 turns on, the Z2 indicator lights on the

display.

To select AM or FM, press the TUNER input selector

button repeatedly.

To select the same source as the main room’s, press

ZONE 2 repeatedly until “Z2 Selector: Source”

appears on the display.

To turn off Zone 2, press OFF.

The zone is turned off.

Press ZONE2 and then press 8RECEIVER.

Zone 2 turns on, the Z2 indicator lights on the

display.

To select an input source for Zone 2, press ZONE2,

followed by an input selector button.

To select AM or FM, press the TUNER input selector

repeatedly.

Note

• You cannot select different AM or FM radio stations for

your main room and Zone 2. The same AM/FM radio

station will be heard in each room.

To turn off Zone 2, press ZONE2 followed by

8RECEIVER.

ZONE 2 OFF MASTER VOLUME

Input selector buttons

8RECEIVER

MUTING

VOLq/w

ZONE2

Input selector buttons

Press ZONE2.

Use VOL q/w to adjust the volume.

Press ZONE 2 (the Z2 indicator on the display

flash).

Use MASTER VOLUME control within 8 seconds

to adjust the volume.

Press ZONE2 followed by MUTING.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR579 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR579

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info