548135

Onkyo TX-NR636 Seite 56

56
Zoom out
Zoom in
Vorherige Seite
1/89
Nächste Seite
Troubleshooting
56
■
The display is dark
• Make sure that Dimmer function is not working. Press
DIMMER button and change the brightness level of the
display.
■
The following settings can be made for the
composite video inputs
• While holding down the input selector button to
configure, press HOME once at a time until "Video ATT:
On" is appeared on the display. To resume the setup,
repeat the above described step until "Video ATT: Off" is
appeared on the display.
This setting is possible for input selectors assigned
with one of the video inputs "VIDEO 1" to "VIDEO 3" in
"1.Input/Output Assign" - "Composite Video Input". If you
have a game console connected to the composite video
input, and the picture is not very clear, you can attenuate
the gain.
Video ATT: Off: (default).
Video ATT: On: (Gain is reduced by 2 dB.)
■
If the picture on your TV/monitor connected to the
HDMI output(s) is unstable
• Try turning the DeepColor function off.
To turn off the DeepColor function, press STB/DVR and
ON/STANDBY on the AV receiver simultaneously.
While holding down STB/DVR, press ON/STANDBY
repeatedly until "Deep Color: Off" is appeared on the
display. To reactivate the DeepColor function, repeat the
above described step until "Deep Color: On" is appeared
on the display.
Radio Wave Caution
The AV receiver uses a 2.4 GHz radio wave
frequency, which is a band used by other wireless
systems as 1 and 2 described below.
1. Devices which use a 2.4 GHz radio wave frequency
• Cordless phones
• Cordless facsimiles
• Microwave ovens
• Wireless LAN devices (IEEE802.11b/g/n)
• Wireless AV equipment
• Wireless controllers for game systems
• Microwave oven-based health aids
• Video transmitter
• Specific type of external monitor and LCD display
2. Less common devices which use a 2.4 GHz radio wave
frequency
• Anti-theft systems
• Amateur radio stations (HAM)
• Warehouse logistic management systems
• Discrimination systems for train or emergency
vehicles
If these devices and the AV receiver are used at the same
time, the audio may be undesirably stopped or disturbed
due to a radio wave interference.
Suggestions for improvement
• Switch off the devices which emit the radio wave.
• Place the interfering devices away from the AV
receiver.
• The AV receiver uses radio wave, and a third person can
receive the wave on purpose or accidentally. Do not use
the communication for important or fatal matters.
• We assume no responsibility whatsoever for any error
or damage of network environment or access device
resulting from the use of this apparatus.
Confirm with the provider or access device maker for
more information.
Scope of Operation
Use of the AV receiver is limited to home use.
(Transmission distances may be reduced depending on
communication environment.)
In the following locations, poor condition or inability to
receive radio waves may cause the audio to be interrupted
or stopped:
• In reinforced concrete buildings or steel framed or iron
framed buildings.
• Near large metallic furniture.
• In a crowd of people or near a building or obstacle.
• In a location exposed to the magnetic field, static
electricity or radio wave interference from radio
communication equipment using the same frequency
band (2.4 GHz) as the AV receiver, such as a 2.4 GHz
wireless LAN device (IEEE802.11b/g/n) or microwave
oven.
• If you live in a heavily populated residential area
(apartment, townhouse, etc.) and if your neighbor’s
microwave oven is placed near your AV receiver, you
may experience radio wave interference. If this occurs,
move your AV receiver to a different place.
When the microwave oven is not in use, there will be no
radio wave interference.
Radio Wave Reflections
The radio waves received by the AV receiver include the
radio wave coming directly from the devices and waves
coming from various directions due to reflections by walls,
furniture and building (reflected waves). The reflected
waves (due to obstacles and reflecting objects) further
produce a variety of reflected waves as well as variation
in reception condition depending on locations. If the audio
cannot be received properly due to this phenomenon, try
moving the location of the wireless LAN device a little.
Also note that audio may be interrupted due to the reflected
waves when a person crosses or approaches the space
between the AV receiver and the wireless LAN device.
• We assume no responsibility whatsoever for any
damages resulting from the use of this apparatus except
in the cases deemed acceptable under the applicable
laws and regulations.
• Operation in all environment is not guaranteed for
wireless LAN. The communication may not be possible
or have desirable communication speed.
Precautions
• Do not use this apparatus near an electronic device
handling high-accuracy controls or weak signals. Doing
so may cause an accident due to a malfunction of the
device.
• Do not use this apparatus in use prohibited location
such as an aircraft equipment or a hospital. Doing so
may cause an accident due to a malfunction of an
electronic device or an electro-medical apparatus. Follow
the instructions of the medical facilities.
■
Electronic device which requires cautions
Hearing aid, pace maker, other medical electronic devices,
… 56 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

onkyo-tx-nr636

Suche zurücksetzen

  • Fire Stick an HDMI 1 an geschlossenen- Ton vom tv. PANASONIC VIERA
    Anschluß UM TON VONONKYO EMPFANGEN?
    DANKE Eingereicht am 15-12-2020 19:37

    Antworten Frage melden

  • Fire Stick mit heim 1 verbunden- Ton vom tv
    Wie schliesse ich onkyo an.
    Danke Eingereicht am 15-12-2020 19:16

    Antworten Frage melden

  • Hallo ich suche eine Bedienungsanleitung für ein Onkyo Tx-sv636 vintage ohne hdmi Anschlüsse. Danke Eingereicht am 2-1-2020 05:14

    Antworten Frage melden

  • Ich benötige die ausführliche Bedienungsanleitung für av 636, wie komme ich an die ran. Eingereicht am 13-11-2014 22:09

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Onkyo TX-NR636 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Onkyo TX-NR636

Onkyo TX-NR636 Bedienungsanleitung - Deutsch - 100 seiten

Onkyo TX-NR636 Bedienungsanleitung - Englisch - 20 seiten

Onkyo TX-NR636 Bedienungsanleitung - Holländisch - 100 seiten

Onkyo TX-NR636 Bedienungsanleitung - Französisch - 40 seiten

Onkyo TX-NR636 Bedienungsanleitung - Italienisch - 100 seiten

Onkyo TX-NR636 Bedienungsanleitung - Spanisch - 40 seiten

Onkyo TX-NR636 Bedienungsanleitung - Schwedisch, Finnisch - 100 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info