Bedienungsanleitung Onkyo TX-NR676E (Seite 29 von 91) (Englisch)

686240

Zoom out

Zoom in

Vorherige Seite

1/91

Nächste Seite

Multi-zone

> Before Start > Part Names > Install > Initial Setup >Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

Basic Operations

You can enjoy audio in the separate room

by, for example, playing a Blu-ray Disc

player in the main room (where this unit is

located) and listening to internet radio in

the separate room (ZONE 2).

0 DSD and Dolby TrueHD audio signals

are not output to ZONE 2 when selected

with the "NET" input selector.

0 You can only select the same inputs for

the main room and separate room with

the "NET" or "BLUETOOTH" input

selector. If you have "NET" selected in

the main room and then select

"BLUETOOTH" in the separate room,

the main room also switches to

"BLUETOOTH". You cannot select

different stations for the main room and

separate room with the AM/FM radio.

0 If ZONE 2 is on, power consumption

during standby becomes larger than

normal.

0 If ZONE 2 is turned on when the

listening mode of the main room is Pure

Audio, it will automatically switch to the

Direct listening mode. (European,

Australian, Taiwanese and Asian

models)

Perform the following procedure when the

unit is on.

1. While holding down MODE (e) on the

remote controller, press ZONE 2 (d) for 3

or more seconds until the remote

indicator blinks twice.

0 The remote controller switches to the

mode for controlling ZONE 2.

2. Point the remote controller at the main

unit and press Í (a).

"Z2" lights on the main unit display.

3. Press the input selector button (b) of the

input to be played in the separate room.

0 On the main unit, after pressing ZONE

2, within 8 seconds press the input

selector button to select the input to

be played in the separate room. To

play the same source in the main

room and separate room, press

ZONE 2 on the main unit twice.

4. Volume adjustment is done on the pre-

main amplifier for the separate room

when connected via ZONE 2 LINE OUT.

When outputting from ZONE speakers,

adjust with volume buttons on the

remote controller.

0 To control on the main unit, press

ZONE 2 and adjust with the MASTER

VOLUME control within 8 seconds.

To turn off the function:

Press Í while in the mode for controlling

ZONE 2 on the remote controller.

Alternatively press OFF on the main unit.

Playing in ZONE 2 only:

If you turn the unit to standby during multi-

zone playback, the Z2 indicator is dimmed

and the playback mode is switched to

playback in a separate room only. Setting

ZONE 2 to on while this unit is in standby

1 2 3

will also switch the playback mode to the

same setting.

To return the remote controller

to main room control mode:

While holding down MODE on the

remote controller, press MAIN (c)

for 3 seconds or more until the

remote indicator flashes once.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR676E Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR676E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info