Bedienungsanleitung Onkyo TX-NR696 (Seite 125 von 159) (Englisch)

686254

125

Zoom out

Zoom in

Vorherige Seite

1/159

Nächste Seite

125

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

 5. Volume

Change the Volume settings.

Setting Item Default Value Setting Details

Volume Display Absolute Switch the volume display between the absolute

value and relative value. The absolute value 82 is

equivalent to the relative value 0 dB.

"Absolute": Absolute value such as "1" and "99"

"Relative": Relative value such as "-81 dB" and

"+18 dB"

• If the absolute value is set to "82", "82 Ref"

appears on the display.

Mute Level -∞dB Set the volume lowered from the listening volume

when muting is on. Select a value from "-∞ dB",

"-40 dB" and "-20 dB".

Maximum Volume Off Set the maximum value to prevent the volume

from becoming too loud. Select a value from "Off",

and "50" to "99". (When "Volume Display" is set to

"Absolute")

Power On Volume Last Set the volume level of when the power is turned

on. Select a value from "Last" (Volume level

before entering standby mode), "Min", "1" to "99"

and "Max". (When "Volume Display" is set to

"Absolute")

• You cannot set a higher value than that of

"Maximum Volume".

Headphone Level 0 dB Adjust the output level of headphones. Select a

value between "-12 dB" and "+12 dB".

4. Source

 1. My Input Volume

Set a volume value for each input selector.

Setting Item Default Value Setting Details

My Input Volume Last Select a value from "Last", "Min", "1" to "49" and

"Max". (When "Volume Display" is set to "Absolute")

• The volume level when the power is turned on is

the value set for "Power On Volume".

• To set the volume to the current volume, press

the button of the input selector you wish to set for

approx. 3 seconds.

 2. Name Edit

Set an easy name for each input. The set name appears on the main unit’s

display. Select the input selector to make the setting.

Setting Item Default Value Setting Details

Name Edit Input name 1. Select a character or symbol with the cursors,

and press ENTER.

Repeat this operation to input up to 10 characters.

"A/a": Switches between upper and lower cases.

(Pressing MODE on the remote controller also

toggles between upper and lower cases)

"←" "→": Moves the cursor in the arrow direction.

Removes a character on the left of the cursor.

" ": Enters a space.

• Pressing CLEAR on the remote controller will

remove all the input characters.

2. After inputting, select "OK" with the cursors, and

press ENTER.

The input name will be saved.

To restore the name to the default value, press CLEAR

on the remote controller on the input screen. Then while

nothing is entered, select "OK", and press ENTER.

• To name a preset radio station, press TUNER on the remote controller, select AM/FM,

and select the preset number.

• This cannot be set if the "NET" or "BLUETOOTH" input is selected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR696 Seite 125

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR696

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info