Bedienungsanleitung Onkyo TX-NR737 (Seite 9 von 20) (Englisch)

549874

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Step 2:

Setting Up



4th Step : Network Connection

Do you want to connect network connection?

It gives you network services that our AV

receiver support. If you wish to skip this step.

select “No. Skip”.

Yes

No. Skip

HOME Exit

Initial Setup

Network Connection

You can check the network connection and make the Wi-Fi

setting. When the Network Connection start screen is

displayed, select "Yes" with the cursors and press ENTER

on the remote controller. If you select "Wired" in the next

screen, you can view the LAN cable connection status. To

make the Wi-Fi setting, select "Wireless", press ENTER on

the remote controller and follow the sections below.

Make the following preparations.

Wi-Fi connection requires an access point such as

wireless LAN router (



). Write down the SSID and

password (key) of the access point if they are shown

in the label of the main body. If the access point has

an automatic setting button (may be called differently

according to the manufacturer), you can set up

without inputting the password. For how to use the

automatic setting button of the access point, refer to

its instruction manual.



The unit supports Wi-Fi connection with 2.4 GHz

access point.

Select the SSID of the access point to be connected

with the cursor buttons and press ENTER.

When the SSID of the access point appears on the TV

screen, select the desired access point.

• If you changed the initial setting of the access point to

skip password entry, Step 3 starts automatically.

• If you changed the initial setting of the access point

to hide the SSID, see "When the access point is not

displayed".

Select and set the authentication method.

Wi-Fi Setup

Select the authentication method.

Enter Password

Push Button

PIN code

When the screen above is displayed, select and set one

of the three authentication methods: "Enter Password",

"Push Button" and "PIN code". See below for details of

and how to set each method.

Enter Password: Enter the password of the access point to

establish connection.

Select "Enter Password" with the cursor buttons and

press ENTER.

Enter the password (



) on the keyboard screen, select

"OK" with the cursor buttons and press ENTER.

• The keyboard screen may be displayed automatically

if the access point device does not have an automatic

setting button.



Select "Shift" and press ENTER to toggle between upper and lower

case. Select "



" or "



" and press ENTER to move the cursor to the

selected direction. Select "Back Space" and press ENTER to delete

the character at the left of the cursor position. To select whether to

mask the password with "*" or display it in plain text, press D on the

remote control. Press + 10 on the remote controller to enable the

"Shift" function and CLR to delete all the input characters.

If the security method of the access point to be

connected is WEP, select "Default Key ID", select "OK"

and press ENTER.

Push Button: Use the automatic setting button of the

access point to establish connection.

Select "Push Button" with the cursor buttons and press

ENTER.

Hold down the automatic setting button of the access

point for the necessary seconds, select "OK" with the

cursor buttons and press ENTER.

PIN code: Select this method when the automatic setting

button of the access point is beyond the reach. Select "PIN

code" with the cursor buttons and press ENTER to display

the 8-digit PIN code. Register the displayed PIN code to the

access point, select "OK" with the cursor buttons and press

ENTER. For how to register the PIN code to the access

point, refer to its instruction manual.

Establish connection.

The connection process starts and the Wi-Fi indicator

on the left of the unit's display starts flashing. When

connection has been established, the Wi-Fi indicator

changes from flashing to staying lit. If the Wi-Fi indicator

does not stay lit, connection has not been established.

Make the setting again. If "Push Button" does not work,

try "Enter Password".

When the access point is not displayed

Select "Other..." with the

cursor on the remote

controller and press ENTER to display the keyboard

screen. Input the SSID and password. Make the

following settings according to the router setting.



WPA/WPA2 method

Select "WPA" or "WPA2" in "Security Method", select

"OK" and press ENTER.



WEP method

Select "WEP" in "Security Method" and select

"Default Key ID". Then select "OK" and press ENTER.

• If encryption setting has not been made on the

wireless LAN router, select "None" in "Security

Method", select "OK" and press ENTER.



Exiting the setup wizard

After finishing the initial setup, keep "Finished" selected

and press ENTER on the remote controller. Connection and

setting of the unit is now completed. See Step 3 and enjoy

your home theater.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR737 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR737

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info