Bedienungsanleitung Onkyo TX-NR737 (Seite 14 von 20) (Englisch)

549874

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Step 3:

Playing Back

Using the ZONE function

You can connect the unit with a pre-main amplifier or

speakers in a separate room and playback audio sources

from an external device connected to the analog audio input

jacks of the unit. And also, you can enjoy sources of "NET",

"USB", "BLUETOOTH" as well as AM/FM broadcasting.

It is also possible to play the sound from different analog

connected devices in the main room and separate room.

•

As for the "NET", "USB" and "BLUETOOTH", you cannot

select different inputs for the main room and separate

room. For example, if "NET" has been selected in the

main room and then "USB" is selected as playback

source in the separate room, the input in the main room

will change to "USB" accordingly.

•

When listening to AM/FM broadcasting, you cannot select

different stations for the main room and separate room.

Therefore broadcasting of the same station will be heard

in the both rooms.

Connecting with Player

To output audio of the Blu-ray Disc player or such other

player as the source of Zone playback, it is necessary to

connect the RCA audio output jacks of the player and the

analog audio input jacks of the unit using the analog audio

cable.

AUDIO

OUT

•

Output to Zone is not possible if the connection is only

with HDMI cable or digital cable.

•

Analog audio output setting may be necessary on the player.

Making ZONE connection



Connecting an amplifier or receiver in another room

You can enjoy 2-channel stereo playback in the other room

during playing 7.1-channel in the main room.

Connect the ZONE2 LINE OUT jacks or ZONE3 LINE

OUT jacks of the unit and the line-in jacks of the pre-main

amplifier in a separate room with an analog audio (RCA)

cable.

Zone 2 Zone 3

• The volume should be adjusted with the pre-main

amplifier used in the separate room.



Connecting speakers in another room

It is possible to directly connect the speakers in another

room without an amplifier. Connect the speakers in another

room to the ZONE2 speaker terminals of the unit using

speaker cables. In this case, 5.1 ch will be the maximum in

the main room when the Zone function is on.



Change the setting: After connecting the speakers,

press RCV and then HOME on the remote controller, select

"Setup" - "2.Speaker Setup" - "Speaker Settings" and set

"Powered Zone2" to "Yes", and press ENTER on the remote

controller.

Zone 2

•

Adjust the volume on this unit. To adjust the volume,

press ZONE2 on the remote controller and adjust with

VOL





. You can mute the sound by pressing MUTING.

Performing ZONE playback

Press ZONE2 or ZONE3 on the remote controller,

point the remote controller at the remote controller

sensor and press

RECEIVER.

"Z2" or "Z3" lights on the main unit display and the ZONE

function is enabled. (ZONE 2 or ZONE 3 is now on.)

Press ZONE2 or ZONE3 on the remote controller

again and press INPUT SELECTOR of the input to be

played in a separate room.

To play the same source in the main room and separate

room, hold down ZONE2 or ZONE3 for approximately 3

seconds.



To control on the main unit, press ZONE2 or ZONE3 and within 8

seconds, press the input selector button of the input to be played in a

separate room. To play the same source in the main room and separate

room, press ZONE2 or ZONE3 twice.

To turn off the ZONE function: Press ZONE2 (or ZONE3)

on the remote controller and press

RECEIVER. To control

on the main unit, press ZONE2 (or ZONE3) and within 8

seconds, press

ON/STANDBY.

•

Zone playback is not possible if the player and the unit

are connected via HDMI cable or digital cable. Connect

the player to the analog audio input jacks of the unit with

analog audio cable. Analog audio output setting may be

necessary on the player.

•

If ZONE 2 or ZONE 3 is on, power consumption during

standby becomes larger than normal.

•

If ZONE 2 or ZONE 3 is turned on when the listening

mode of the main room is Pure Audio, it will automatically

switch to Direct. (European, Australian and Asian models)

• While ZONE 2 or ZONE 3 is on, the RI linked system

function (interlink between Onkyo components) is

disabled.

• This unit is equipped with WHOLE HOUSE MODE

function which the same source is played back instantly

in all rooms if you press ZONE2 and ZONE3 buttons

simultaneously during playing in the main room.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR737 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR737

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info