Bedienungsanleitung Onkyo TX-NR801 (Seite 13 von 97) (Englisch)

553769

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

Index Parts and Facilities—Continued

1 SEND/LEARN indicator [7]

Lights red when signals are sent by the remote con-

troller. It also ﬂashes when a button is pressed and

the battery power is low.

2 ON/STANDBY button [27, 68]

ON: Press to turn on the TX-NR801/TX-NR801E.

STANDBY: Press to place the TX-NR801/

TX-NR801E in the standby state.

Be aware that pressing the STANDBY button only

places the TX-NR801/TX-NR801E in standby and

does not turn the power off completely.

3 SLEEP button [40]

Press to set the sleep function.

The SLEEP button enables you to set the

TX-NR801/TX-NR801E to turn off automatically

after a speciﬁed time period.

4 MACRO 1, 2 button [86, 88, 89]

Press to program or execute the macro function.

5 MODE buttons and indicators [80-88]

Press to select the component to be operated by the

remote controller. When a MODE button is pressed,

it will light for 8 seconds. The selected MODE but-

ton will also light whenever any other operation but-

ton is pressed.

6 RETURN button [29]

Press to enter the selected setting and return to the

previous menu.

7 CH button [46]

Press to select a preset channel for the tuner.

8 CH SEL button [35, 40, 65]

Press to select a speaker channel when adjusting the

speaker level.

9 AUDIO SEL button [41, 65]

Press to select the audio input signal.

0 LEVEL / buttons [35, 40, 65]

Press to adjust the volume of the speaker selected

using the CH SEL button.

A Operation buttons [80-81, 85]

Press to operate other devices connected to the

TX-NR801/TX-NR801E.

B INPUT SELECTOR buttons [36, 39, 44, 52, 56,

65, 68]

Press to select an input source.

Same as the input selector buttons on the front panel

of the TX-NR801/TX-NR801E. The input source

for each button is given here. DVD:DVD, CD:CD,

V1:VIDEO1, V2:VIDEO2, V3:VIDEO3,

V4:VIDEO4, V5:VIDEO5, TAP:TAPE, TUN:FM/

AM, PH:PHONO.

C Listening mode buttons [44, 65]

Press to select a listening mode.

D Re-EQ button [55, 61]

Depending on the listening mode, you can turn the

Re-EQ function on or off.

E DISPLAY button [41]

For changing the front display.

F DIMMER button [40]

Adjusts the display brightness.

There are three settings available: normal, dark, and

very dark.

G LIGHT button

Press to turn on and off the lights in the buttons of

the remote controller.

H SETUP button [29]

Press to display the Setup Menu on the TV screen

and in the display. Press again to exit the menu.

I ///, ENTER button [29]

When in the Setup Menu, press the upper and lower

arrow buttons to select an item, press the right and

left arrow buttons to select parameter values or

modes, and press the ENTER button to advance to

the next item.

J VOL button [39, 65]

Press to adjust the volume.

K TEST button [35]

This button is used to set the speaker output levels.

Use this button in conjunction with the LEVEL /

and CH SEL buttons to calibrate the speaker lev-

els without entering the Setup Menu.

L MUTING button [39]

Press to activate the mute function.

M ZONE 2 button [68]

Press to perform operations in the remote zone.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR801 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info