553769
30
Zoom out
Zoom in
Vorherige Seite
1/97
Nächste Seite
30
Selecting the Appropriate Setting for Your Connections
In this section, you will perform the initial settings for
the following scenarios.
When the impedances for speakers connected to the
TX-NR801/TX-NR801E are between 4 and 6 (See
page 18).
When connecting speakers to the ZONE 2
SPEAKERS terminals (See page 66).
When operating the remote controller using the IR IN
terminal (See page 69).
When you want to fix the TV Format setting to PAL or
NTSC.
When you want to fix the AM Frequency Step setting
to 9 kHz or 10 kHz.
Note:
The settings within the Hardware Setup Menu will need
to be made before you use your TX-NR801/
TX-NR801E for the first time. Once you have selected
one of the Hardware Setup menu items, the setting will
not be displayed again when you enter the Basic Menu.
To change the setting at a later date, select the Advanced
Menu to display the Hardware Setup Menu.
If you want to perform these operations using the remote
controller, first press the RCVR button.
Speaker Impedance Sub-menu
Use this sub-menu to set the impedance level of the
TX-NR801/TX-NR801E to match the specifications of
the speakers you are using.
a. Minimum
6 ohms (default): Select when the impedances of all
speakers are between 6 and 16 .
4 ohms: Select when the impedance of even one
speaker is between 4 and 6 .
Note:
Before you change this setting, be sure to first lower the
volume at the TX-NR801/TX-NR801E to the minimum
level.
Surr Back/Zone 2 Sub-menu
Hardware Setup
1
Display the main menu.
Press the SETUP button on the front panel or
SETUP button on the remote controller to display
the main menu on the monitor and front display.
DSP
A
-
FO
RM LISTENING MODE MEMORY
THX
SURROUNDDIRECT
/
PURE AUDIO STEREO
FM
MODE
MEMORY
ENTER
RE
TURN
SETUP
TUNING
PRESET
SETUP/ENTER/
RETURN/Cursor
/ //
[ENTER]Quit:[SETUP]
Advanced Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
4.Preference
5.Network Setup
Basic Menu
0.Hardware Setup
1.Speaker Impedance
2.Surr Back/Zone2
3.Remote Setup
4.TV Format
5.AM Frequency Step
[ENTER]Quit:[SETUP]
2
Use the and cursor buttons to select
“0. Hardware Setup” and then press the
ENTER button.
The “Hardware Setup” menu appears.
3
Use the and cursor buttons to select
an item and then press the ENTER button.
4
Use the and cursor buttons to select
an item and then use the and cursor
buttons to set the desired value.
5
Press the SETUP button to exit the Setup
menu.
Press the RETURN button to return to the previ-
ous menu.
0-1.Speaker Impedance
a.Minimum :6 ohms
Quit:[SETUP]
0-2.Surr Back/Zone2
a.Surr Back/Zone2
:Zone2
Quit:[SETUP]
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Onkyo TX-NR801 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info