Bedienungsanleitung Onkyo TX-NR801 (Seite 74 von 97) (Englisch)

553769

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

Enjoying Net Audio

—Continued

MAC Address Sub-menu

You can view the assigned MAC address. Every net-

work port is identiﬁed by a unique MAC address (This

is read-only information).

a. MAC Address

Displays the MAC address assigned to your

TX-NR801/TX-NR801E.

Client Sub-menu

A client is a device that receives information from a

sever. One server can serve multiple clients.

Throughout this guide, the term “client” refers to your

TX-NR801/TX-NR801E.

a. Client Name

Shows the name used on Net-Tune Central.

The client name has already been set by the TX-NR801/

TX-NR801E.

b. Wakeup on LAN (Network connection status)

Sets whether to leave the network connection open or not

while the TX-NR801/TX-NR801E is in the standby state.

On:

Leaves the network connection open.

Off:

Closes the network connection while the

TX-NR801/TX-NR801E is in the standby state. You

can save power consumption during standby state.

c. NTSP Port

You can change the TCP/IP port number used for com-

municating with Net-Tune Central. Be sure to match the

port number set here with the port number set on Net-

Tune Central. When you change the port number set-

tings, press the button to display the NTSP Port

Input menu.

Select a number using the

/ buttons, and press the

ENTER button to enter the number.

After all the necessary numbers are entered, the

TX-NR801/TX-NR801E exits the number-entry mode.

After the necessary settings are complete, press the

RETURN button to go back to “5. Network Setup

Menu,” select “

→

Save Settings,” and press the

ENTER button to save the setting you made.

Never turn off the TX-NR801/TX-NR801E while sav-

ing the settings.

The illustrations used here represent the remote control-

ler. When you perform the procedures on the

TX-NR801/TX-NR801E, use the corresponding buttons

on the front panel.

123456789012345678901234

5-3.MAC Address

a.MAC Address

:XX:XX:XX:XX:XX:XX

Quit:[SETUP]

5-4.Client Setup

a.Client Name

:TX-NR801/XXXXXX

b.Wakeup on LAN

:Off

c.NTSP Port

:XXXXXX

Quit:[SETUP]

Input Setup Menu

Press the NET A button.

Press the RCVR button, and then

press the SETUP button to display

the main menu on the monitor and

front display.

When the “Basic Menu” is displayed,

select “

→

Advanced Menu” using the

and cursor buttons and press the

ENTER button to display the “Advanced

Menu.”

Use the and cursor buttons to

select “2. Input Setup” and then

press the ENTER button.

The “Input Setup” menu appears.

Use the and cursor buttons to

select the sub-menu that you want

to enter and then press the ENTER

button.

Use the and cursor buttons to

select an item and then use the

and cursor buttons to set the

desired value.

Press the SETUP button to return

to the main menu.

2.Input Setup

1.Music Server

2.Playback OSD Display

3.Video Setup

4.IntelliVolume

5.Listening Mode Preset

[ENTER]Quit:[SETUP]

Advanced Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR801 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info