Bedienungsanleitung Onkyo TX-NR808 (Seite 67 von 100) (Englisch)

645307

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Note

• When modifying network settings, after modifying it is neces-

sary to execute “Save”.

This section explains how to configure the AV receiver’s

network settings manually.

If your router’s DHCP server is enabled, you don’t need to

change any of these settings, as the AV receiver is set use

DHCP to configure itself automatically by default (i.e.,

DHCP is set to Enable). If, however, your router’s DHCP

server is disabled, for example, you’re using static IP

addresses, you’ll need to configure these settings yourself,

in which case, a knowledge of Ethernet networking is

essential.

What’s DHCP?

DHCP (Dynamic Host Configuration Protocol) is used by

routers, computers, the AV receiver, and other devices to

automatically configure themselves on a network.

What’s DNS?

The DNS (Domain Name System) translates domain

names into IP addresses. For example, when you enter a

domain name such as www.onkyousa.com in your Web

browser, before accessing the site, your browser uses DNS

to translate this into an IP address, in this case

63.148.251.142.

Note

• This procedure can also be performed on the AV receiver by

using its SETUP, arrows, and ENTER.

■ Mac Address

This is the AV receiver’s MAC (Media Access Control)

address. This address cannot be changed.

■ DHCP

This setting determines whether or not the AV receiver

uses DHCP to automatically configure its IP Address,

Subnet Mask, Gateway, and DNS Server settings.

` Enable:

DHCP enabled.

` Disable:

DHCP disabled.

If you select “Disable”, you must configure the “IP

Address”, “Subnet Mask”, “Gateway”, and “DNS

Server” settings yourself.

■ IP Address

If you set the “DHCP” setting to “Disable”, you must

specify an IP address. Enter a static IP address provided

by your ISP.

The IP address must be within the following ranges.

` Class A:

10.0.0.0 to 10.255.255.255

` Class B:

172.16.0.0 to 172.31.255.255

` Class C:

192.168.0.0 to 192.168.255.255

Most routers use Class C IP addresses.

■ Subnet Mask

If you set the “DHCP” setting to “Disable”, you must

specify a subnet mask address.

Enter the subnet mask address provided by your ISP (typi-

cally: 255.255.255.0).

■ Gateway

If you set the “DHCP” setting to “Disable”, you must

specify a gateway address.

Enter the gateway address provided by your ISP.

■ DNS Server

If you set the “DHCP” setting to “Disable”, you must

specify a DNS server.

Enter the DNS server addresses provided by your ISP.

■ Proxy URL

To use a Web proxy, enter its URL here.

Network Settings

Press RECEIVER, followed by SETUP.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the

appropriate external input is selected on your TV.

Use q/w to select “Hardware Setup”, and then

press ENTER.

The “Hardware Setup” menu appears.

Use q/w to select “Network”, and then press

ENTER.

The “Network” screen appears.

Use q/w to select the setting, and use e/r to set

them.

To enter an IP address, select the setting, and then

press ENTER. The arrow can then be used to enter

numbers. Press ENTER again to set the number.

The settings are explained below.

7. Hardware Setup

1. Remote ID

2. Multi Zone

3. Tuner

4. HDMI

5. Auto Power Down

6. Network

7. Firmware Update

7-6. Network

MAC Address

DHCP

IP Address

Subnet Mask

Gateway

DNS Server

Proxy URL

Proxy Port

xx : xx : xx − yy : yy : yy

Disable

aaa.bbb.ccc.ddd

http://www.proxy.xxx.com

8080

When you’ve finished, press RETURN.

The save confirmation screen appears.

Use q/w to select “Save”, and then press ENTER.

When modifying network settings, after modifying it

is necessary to execute “Save”.

When you’ve finished, press SETUP.

The setup menu closes.

Save

Cancel

7-6. Network

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR808 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info