Bedienungsanleitung Onkyo TX-NR828 (Seite 103 von 152) (Englisch)

527521

103

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Appendix

En-103

Network/USB Features

■ Ethernet Network

For the best results, a 100Base-TX switched Ethernet

network is recommended. Although it’s possible to

play music on a computer that’s connected to the

network wirelessly, playback may be unreliable, so it

is recommended to use wired connections.

■ Ethernet Router

A router manages the network, data-routing and

supplying of IP addresses. Your router must support

the following:

• NAT (Network Address Translation). NAT allows

several networked computers to access the Internet

simultaneously via a single Internet connection. The

AV receiver needs Internet access for Internet radio.

• DHCP (Dynamic Host Configuration Protocol).

DHCP supplies IP addresses to the network

devices, allowing them to configure themselves

automatically.

• A router with a built-in 100Base-TX switch is

recommended.

Some routers have a built-in modem, and some

Internet Service Providers (ISP) require you to use

specific routers. Please consult your ISP or computer

dealer if you’re unsure.

■ CAT5 Ethernet cable

Use a shielded CAT5 Ethernet cable (straight-type) to

connect the AV receiver to your home network.

■ Internet Access (for Internet radio)

To receive Internet radio, your Ethernet network must

have Internet access. A narrowband Internet

connection (e.g., 56K modem, ISDN) will not provide

satisfactory results, so a broadband connection is

strongly recommended (e.g., cable modem, xDSL

modem, etc.). Please consult your ISP or computer

dealer if you’re unsure.

Note

• To receive Internet radio with the AV receiver, your

broadband Internet connection must be working and able to

access the Web. Consult your ISP if you have any problems

with your Internet connection.

• The AV receiver uses DHCP to configure its network

settings automatically. If you want to configure these

settings manually, see “Network” (➔ page 77).

• The AV receiver does not support PPPoE settings, so if you

have a PPPoE-type Internet connection, you must use a

PPPoE-compatible router.

• Depending on your ISP, you may need to specify a proxy

server to use Internet radio. If your computer is configured

to use a proxy server, use the same settings for the AV

receiver (➔ page 77).

■ Server playback

The AV receiver can play digital music files stored on

a computer or media server and supports the

following technologies:

• Windows Media Player 11

• Windows Media Player 12

• DLNA-certified media server

• The computer or media server must be on the same

network as the AV receiver.

• Up to 20,000 folders can be displayed, and folders

may be nested up to 16 levels deep.

Note

• Depending on the media server, the AV receiver may not

recognize it, or may not be able to play its music files.

■ Remote playback

• Windows Media Player 12

• DLNA-certified (within DLNA Interoperability

Guidelines version 1.5) media server or controller

device.

The setting varies depending on the media server or

controller devices. Refer to your devices’ instruction

manual for details.

If the operating system of your personal computer is

Windows 8/Windows 7, Windows Media Player 12 is

already installed. For more information, see the

Microsoft web site.

• USB mass storage device class (but not always

guaranteed).

• FAT16 or FAT32 file system format.

• If the storage device has been partitioned, each

section will be treated as an independent device.

• Up to 20,000 folders can be displayed, and folders

may be nested up to 16 levels deep.

• USB hubs and USB devices with hub functions are

not supported.

Note

• If the media you connect is not supported, the message “No

Storage” will be displayed.

• If you connect a USB hard disk drive to the AV receiver’s

USB port, we recommend that you use its AC adapter to

power it.

• The AV receiver supports USB MP3 players that support

the USB Mass Storage Class standard, which allows USB

devices to be connected to computers without the need for

special drivers or software. Note that not all USB MP3

players support the USB Mass Storage Class standard.

Refer to your USB MP3 player’s instruction manual for

details.

• Protected WMA music files on an MP3 player cannot be

played.

• Onkyo accepts no responsibility whatsoever for the loss or

damage to data stored on a USB device when that device

is used with the AV receiver. We recommend that you back

up your important music files beforehand.

• MP3 players containing music files that are managed with

special music software are not supported.

Network Requirements

Server Requirements

USB Device Requirements

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR828 Seite 103

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR828

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info