Bedienungsanleitung Onkyo TX-NR838B (Seite 4 von 26) (Englisch)

577806

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Step 1:

Connections

be displayed. It is also possible to use the multi-zone function

with this jack. For details, see the section 6 "Using the multi-

zone function" of "Step 3: Playing Back".

The unit supports the HDMI Through function that allows

transmission from players to the TV even if the unit is in

standby. You have to modify the settings to enable the input

selection link with CEC compliant device, connection with

ARC compatible TV, and HDMI Through function. See "2nd

Step : Source Connection" of "Step 2: Setting Up".

 To enjoy HDCP2.2 protected video, connect the player to

the HDMI IN3 jack and the TV to the HDMI OUT MAIN

jack of the unit. Your player and TV need to support

HDCP2.2.

 To play 4K or 1080p video, use the high speed HDMI cable.

 It is possible to send video and audio of an MHL-enabled

mobile device by connecting the MHL-enabled mobile device

to the AUX INPUT HDMI/MHL jacks on the front panel.

Connecting Components without HDMI

If your AV component does not have HDMI jack, use an

available jack of your component for cable connection with

this unit. Just as the HDMI jacks, other jacks on this unit have

a preassigned input selector button on the front panel. See

the name of the input selector button shown with the jack

when connecting the device.

3 2

145



Audio signal connection

Digital connection: Use a digital optical cable

(OPTICAL) or digital coaxial cable (COAXIAL) for

connection with a player.

Digital optical cable (OPTICAL)

¼

As the digital in optical jack of the unit has a

cover, push in the cable against the cover as it is

turned inside.

Digital coaxial cable (COAXIAL)

Analog connection: Use an analog audio (RCA) cable

for connection with a player.

To enjoy multi-zone playback of audio of a CD player

or such other player without HDMI output jack, you

need to use the analog audio (RCA) cable to connect

the corresponding jacks of the player and this unit.

For details on the multi-zone function, see the section

6 "Using the multi-zone function" of "Step 3: Playing

Back".

Analog audio (RCA) cable

Connection with turntable: If it uses an MM type

cartridge and does not have a built-in audio equalizer,

connect it to the

PHONO jack. If the connected

turntable has a built-in audio equalizer, connect it to the

TV/CD jack.

¼

If it uses an MC type cartridge, install an audio equalizer compatible

with MC type cartridge between the unit and the turntable by

connecting it to the

TV/CD jack. For details, refer to the turntable's

instruction manual.

¼

If the turntable has a ground wire, connect it to the GND terminal of

this unit. If connecting the ground wire increases noise, disconnect it.



Video signal connection

The unit has a video upconversion function. For details, see

the next section.

Use a component video cable to connect a TV

with component video input jacks and a player with

component video output jacks.

Component video cable

¼

Its transmitted video has higher quality than that

of composite video cable.

Use a composite video cable to connect a TV with

composite video input jack or a player with composite

video output jack.

Composite video cable

Video signals input to the composite video input

jack or the COMPONENT VIDEO IN jacks will be

upconverted to HDMI signals and then output from

the HDMI output jack.

Note that it is not possible to convert digital audio

input signals to analog or vice versa.

AV Receiver

¼

When you upconvert video signals input to the

COMPONENT VIDEO IN jacks and output them from

the HDMI OUT jack, set the output resolution of the

player to 480i or 576i. If the input has 480p/576p or

higher resolution, a message prompting you to change

the resolution setting will appear. If your player does

not support 480i or 576i output, use the composite

video jack.

¼

If multiple video signal inputs are put into one input

system, the output will be made in the order of HDMI,

COMPONENT VIDEO, and composite video.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR838B Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR838B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info